Parts Needed for Adding Electric Brakes to Trailer with Bearings LM67048 25580
Published 10/30/2020
Products Featured in This Question
Question:
Hi I want to convert my boat trailer to electric breaks and also want to replace the leaf springs, shackles, u bolts, hubs on top of everything. When I measured the leaf spring with the boat on the trailer, from center to center bolt read 26. Also the axel is square 2 inch by 3 inch. My bearings are 25580 and Lm67048. The rims are 6 on 5 1/2, 15 inch. Can you guys guide me on everything I need to switch the boat trailer to electric breaks? Thanks
asked by: Jared S
Expert Reply:
For a new hub/drum that will work great with your current axles you'd want the part # 8-201-5UC3-EZ and then for brake assemblies you'd want the # AKEBRK-7-SA which are self-adjusting. To wire up the brakes you'd need 10 gauge wire like part # 10-1-1 which we sell by the foot.
Then leaf springs the part # e34SR would work really well too. Then for a U-bolt kit you'd want the part # APUBR-8.
For new shackles I'd need you to get me the length of the ones you have now though. Measured from hole to center to hole center.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of SpeedStrap Ratchet Straps - Ratchet Tie-Down with Snap S-Hooks - SS38PV
- Q&A: Can Different Grease Seals be Installed on Dexter Hubs 8-213-5UC1-EZ to Make Them Fit 2.25" ID?
- Search Results: 25580 / lm67048 trailer hubs and drums
- Search Results: bearing lm67048 and 25580 trailer bearings races seals caps
- Search Results: 8~201
- Search Results: motorcycle tie down straps
- Search Results: timken 25580
- Search Results: lippert trailer brakes
- Search Results: dexter trailer brakes
- Q&A: Can Lippert ABS 12" Brakes And Hubs Be Used On Equipment Hauler Trailer With Standard 12" Brakes 7K?
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Q&A: Looking For New Brakes And Hubs For Trailer With Hub Number 8-201
- Article: Most Popular Wheel Bearings
- Video: The Low-Down on the Trailer Hub and Drum Assembly
- Shop: Electric Trailer Brake Assembly for Lippert ABS Hubs - 12" - Left/Right Hand - 5.2K - 7K
- Shop: SpeedStrap Ratchet Tie-Down, Snap Hooks & Axle Strap - 2" x 10' - 3,333 lbs - Black - Qty 1
- Shop: SpeedStrap Ratchet Tie-Down w/ Snap S-Hooks & Soft Tie - 1" x 15' - 833 lbs - Black - Qty 2
- Shop: SpeedStrap Ratchet Tie-Down w/ Snap S-Hooks & Soft Tie - 1" x 15' - 833 lbs - Red - Qty 2
- Q&A: Difference Between Dexter and etrailer.com Brand 12 inch Brake Assemblies
- Q&A: What Is The Difference Between Dexter Electric Brakes 23-180-181 and 23-105-106?
- Q&A: What is Difference Between TruRyde and Timken Grease Seals
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Jared S.
10/30/2020
Hi I want to convert my boat trailer to electric breaks and also want to replace the leaf springs, shackles, u bolts, hubs on top of everything. When I measured the leaf spring with the boat on the trailer, from center to center bolt read 26. Also the axel is square 2 inch by 3 inch. My bearings are 25580 and Lm67048. The rims are 6 on 5 1/2, 15 inch. Can you guys guide me on everything I need to switch the boat trailer to electric breaks? Thanks