The Solera Awning Plain Idler Head Hardware for Front Cover and Back Cover

Question

Question:

Is black the the OEM color? My color looks like a dark bronze. Also, do you carrty the screws that fasten the two covers together? Thank you!

asked by: Mark H

0

Expert Reply:

Black or white are the OEM colors for the idler head. The Replacement Solera Manual Awning Head Cover Fastener - #6 x 1/2" Screw - Qty 1 # LC266156 is what you are seeking. You will need 6 of them for each head assembly.

expert reply by: Jason S

0

click to enlarge

Answer 1

The screws you would need for the Lippert Edge Idler Cover part #LC37UD are the part #LC266156 and you'd need a total of 1.

view full answer...

Answer 2

Yes we do. The correct rear cover you need is the part #LC289567 to match the front cover #LC643923 you referenced and the picture you sent in.

view full answer...

Answer 3

Yes, the Solera Awning Plain Idler Head Front Cover #LC289566 that you referenced is the correct cover for a Solera idler awning head like you said you have on your 2019 Heartland Pioneer RV.

view full answer...

Answer 4

Hey Jim! The Replacement Back Cover for Solera Power Awnings - Drive Head or Idler Head - Regal Style - Black #LC643921 is a pretty simple installation that just requires you to remove the mounting screws, remove the cover, and then reverse the order…

view full answer...

Answer 5

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 6

Surely! To replace the drive head cover for your Regal Awning you need part #LC643922 for the front part of the cover and part #LC643921 for the back part of the cover. Attached are review videos for you to check out.

view full answer...

Answer 7

Since you have a regal-style Solera awning the correct front cover for the drive head would be part #LC643922. If you needed to replace the idler head as well then you'd want part #LC643923. If the back side of the cover is damaged for either…

view full answer...

Answer 8

To replace the screws on the Front Cover for Solera Power RV Awnings item #LC643922 you will want the Replacement Solera Manual Awning Head Cover Fastener item #LC266156. These are #6 pan head screws that are a 1/2" in diameter. We do not carry…

view full answer...

Answer 9

For the Replacement Cover for Solera Awnings #LC643923 for the idler head, and the Replacement Cover for Solera Awnings #LC643922 for the drive head, you can use the: -Replacement Solera Manual Awning Head Cover Fastener #LC266156, which are #6 x…

view full answer...

Answer 10

We do have what you need for a replacement Regal head cover in black for your Solera power awning. I'm not sure if you need the drive head (which is on the right if you are facing your awning) or idler head (on the left) so I'll go ahead and…

view full answer...

Answer 11

The replacement plug/grommet you are looking for is the Replacement Manual Override Grommet for Solera Powered RV Awnings #LC95ED. So this will be what you need to fill the hole in your awning head (even though the replacement drive head cover really…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

The Solera Awning Plain Idler Head Hardware for Front Cover and Back Cover

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching