What Frame Width Does Curt Hitch # C15445 Fit on Vehicle

Question

Question:

After ordering this hitch probably should have looked before ordering, I was trying to see how wide this hitch is and cant find any specs on this. Can you help me with this prior to shipping it out. I need it to fit a 34inch frame on our 99foot motorhome. Thank you.

asked by: Dixie D

0

Expert Reply:

As long as the 34 inch width dimension you took was from outside to outside on the frame channels the Curt hitch part # C15445 will fit as that's the frame dimensions it was designed to fit.

expert reply by: Jameson C

0

Answer 1

The Curt Class V 2 Inch Hitch #C15445 is listed to fit a 2011 Ford F-450 Cab and Chassis with 34 inch wide frame. I am sending a link to the installation instructions of the Curt hitch. If you will be needing a pintle hook mount with a long shank I…

view full answer...

Answer 2

For your 1996 Chevy K2500 with a step bumper the B and W Hitch part #BWHDRH25124 is a confirmed fit. The distance between the mounting holes left to right is 34-1/2 inches. The spare will need to be temporarily moved to install this but it will be…

view full answer...

Answer 3

It looks like you're asking about the B&W Heavy-Duty Trailer Hitch Receiver, part #BWHDRH25122, for your 1996 Ford F-150. You didn't say exactly which dimensions you're looking for but I went out to the warehouse and measured the…

view full answer...

Answer 4

What you will want to do is measure the distance between the mounting holes on the frame of your truck to see if the Curt hitch part #C15300 will fit. If the holes are 36 inches apart on center then this hitch will fit and work well.

view full answer...

Answer 5

I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item #C15845. I have attached a couple of diagrams with the dimensions of this hitch on them. From the center of the back bolt to the front of the receiver is 26" The…

view full answer...

Answer 6

Because the mounting flange of the Curt #C15511 Class V hitch has 3 tabs on each side, rather than a continuous mounting flange like many other hitches, it'll fit around the rivet shown in your photo. However, be aware that the Curt #C15511 is a…

view full answer...

Answer 7

B&W hitch #BWHDRH25122 is designed to fit many trucks including the 1967 Ford F-350 as long as it has (or had) a stock factory bumper. Most of the trucks of that era had a 34 inch frame width which this hitch will fit. But to answer your question…

view full answer...

Answer 8

I have attached for you below a detailed dimensional drawing of the Curt Trailer Hitch Receiver part #C15800 which is a confirmed fit for the vehicles listed below. The trailer hitch has a class V rating with 2-1/2" opening which is great for…

view full answer...

Answer 9

The width of your frame indicates that your 2012 Ford F-450 is most likely a cab and chassis model which has the frame width a few inches than a standard truck bed. But if you can measure the distance between the mounting holes on the frame of your…

view full answer...

Answer 10

So there's one of two things going on here if your Curt 3-Piece Trailer Hitch Receiver #C15511 isn't lining up properly on your 1998 Chevy K3500 pickup. The first possibility, and the most likely, is that the hitch was slightly bent, or…

view full answer...

Answer 11

I spoke to my contact at Curt and he informed me that the Curt hitch #C15317 center section measures 31-5/8 inches. The center to center mounting hole width with the flanges attached is 34-7/8 inches. He also informed me that the flanges on the…

view full answer...

Answer 12

I am happy to help! The width of the Curt Trailer Hitch Receiver #C15325 measured center of the left side bolt hole to the same center of the same hole on the right side measures 34-1/2". From the center of the furthest forward bolt hole to the…

view full answer...

What Frame Width Does Curt Hitch # C15445 Fit on Vehicle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching