Curt Trailer Hitch Receiver - Custom Fit - Class V - 2"
This item does not fit your vehicle
1997 Acura TL
These items fit your vehicle
1997 Acura TL
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re towing serious weight, you need a hitch that can handle it without breaking a sweat. This Curt Class V trailer hitch receiver is rated for 16,000 lbs maximum gross trailer weight and 2,400 lbs maximum tongue weight. When used with a weight distribution system, it’s capable of up to 17,000 lbs GTW and 2,400 lbs WD tongue weight. It’s built from fully welded steel for heavy-duty towing and uses precision, robotic welds to keep strength consistent across every connection.
You don’t need to weld or drill holes to get this hitch on your vehicle. It’s a custom-fit design that bolts directly onto the frame using existing mounting points. Installation instructions come in the box so you can follow along step by step. Everything lines up where it should, making this a straightforward install for anyone who likes to handle upgrades themselves.
Durability matters when you’re pulling weight every day. The sturdy square-tube design is finished with a black powder coat over a protective base layer for superior rust resistance. The result is a hitch that stays solid through wet roads, salty air, and long hauls without corroding or fading.
This hitch gives you a 2" x 2" receiver opening—the standard size for most towing gear. It’s compatible with ball mounts, bike racks, cargo carriers, and other accessories built around the 2" format. Ball mount, pin, and clip are sold separately so you can choose the setup that fits your hauling needs.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Great product. Not pleased with the way it was shipped. It came wrapped in a double layer of 10 mil plastic with tape holding it together. Looked like repack part that I paid full price for. I'm not a picky person, but I like to be the one that knocks the paint off not UPS.
Great receiver! Perfect fit!
2017 Titan XD S
Product was delivered on time and looks good, won't know the fit until after the snow.
Shippers could have been a little easier on it wrapping was torn all to pieces.
Super easy to find exactly what fit my truck. Etrailer is always my goto for parts.
Would not fit. Mounting holes won't line up. I got 8 of 10 in with some persuasion from a maul. Will have to weld on last spot. Don't recommend.
David B.
8/30/2022
Hi Joshua, would it be possible that there was corrosion or some caked on dirtroad grime that could have made the fit not fit?
Great product... installation was easy but the instructions were very basic. It would have been nice to know I didn’t have to remove the stock trailer hitch. There were no installation videos on this particular model.
Great service, timely delivery, great product, great price from all the research I did, cant beat etrailer, hitch fit great, bolted up just like curt said and advertised it would, had one bolt on mounting that fit little snug against the slot pre-drilled slot, other than that went great and was on in probably 15 min and completed, would have been nice if Id had air gun, but got it done, looks great, on my 2017 Titon XD - s
will allays look to etrailer for my needs in the future! Thanks!!!
Yes it hangs low under the factory hitch. I don’t care much for the adjustable hitches. They are very loose feeling to me. Between my 4” & 6” drop hitch’s I have 2 spots to choose from to make the height work. This thing is massive! I feel sorry for a car if I get rear ended cause it will probably be totaled.
I purchased a class 5 Curt trailer hitch from E-trailer.com. Along with a seven to
four wire vehicle specific plug for my 2017 Nissan Titan. I was extremely satisfied with the price, free shipping , The quality of the product. Well packaged as to not scratch the paint .Easy to install with the help of 1 other person.
i don't like how far below the rear bumper it sticks. i wish it was up about 3 inches so the square receiver would fit into the factory square cutout in the bumper that the factory hitch nestles into. I had to turn my hitch upside down and put the ball into the bottom to get my 14k tilt trailer to to sit level. once you add a lot of tongue weight with one of those undesirable tongue heavy loads it will be dragging the ground when you go through dips at intersections. I WISH I HAD GONE WITH THE FACTORY IV HITCH.
Fit perfectly, easy installation, and holds up well. My son and I got this kit put on in less than 1/2 hour. The bolts than needed removed to install the kit went right back in to place. I would strongly recommend this for anyone looking to install a tow kit on their Titan.
Brandon J.
7/18/2024
The hitch is holding up wonderfully. It is dependable, durable, and through repeated use, there is no knicks, rust, or other blemishes. Everything works great. I am still happy with the product.
Needs its own hardware.
Difficult to use original hardware due to threads stripped from assembly. Also original hardware bolt heads would round off.
I would not recommend using without new hardware.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
5/2/2019
It works good but wish that I would have bought the one that replaces the receiver under the bumper. My adjustable RV hitch falls right in between right height and wrong but its ok because of the load adjusters.