Does Replacement Cover for RetraxONE Tonneau Include Bearings

Question

Question:

Is this the full cover with ball bearings and all? Is there a way to just replace the ball bearings on one of these if they have rusted to the point where they don’t roll? Thank you

asked by: Miles

0

Expert Reply:

The Replacement Cover for RetraxONE MX Hard Tonneaus # RT64373 that you referenced does come with the bearings on the sides of the cover. There isn't a way to replace just the bearings so this would be what you'd need to fix your cover.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I reached out to my contact at Retrax who said that the number you gave me means that you have the RetraxONE MX Hard Tonneau Cover #RT60373 on your 2016 Ford F-150 with the 5-1/2' bed. If your cover is leaking at the tailgate and you have already…

view full answer...

Answer 2

It seems like you have the RetraxONE MX #RT60373. If that's the case, here is the 5-1/2 foot replacement cover #RT64373 for your 2018 Ford F-150.

view full answer...

Answer 3

Do you know which specific tonneau you have on your truck by chance? Retrax has a few models.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Does Replacement Cover for RetraxONE Tonneau Include Bearings

Product Page this Question was Asked From

Continue Researching