Parts Needed to Upgrade 12 Inch Wheel to 14 Inch Wheel With Different Bolt Pattern
Updated 07/30/2020 | Published 07/28/2020 >
Products Featured in This Question
Question:
I have a silly trailer with 4.8x 12 wheel on 4 lugs. How do I upgrade to a 14 in wheel and tire?
asked by: Charles H
Expert Reply:
To upgrade to a 14 inch wheel, you will obviously need new wheels and tires. I recommend the Karrier ST205/75R14 Radial Trailer Tire with 14" White Wheel - 5 on 4-1/2 - Load Range C # AM32153 for a great quality radial tire that will serve you well for street and highway travel. All 14 inch wheels we carry have the 5 on 4-1/2 inch bolt pattern, so you will need to replace your current hubs to upgrade to this size.
To determine the correct hubs, you will need to match your bearing numbers from your current hub. There are a couple of options to get the numbers we need. The first option is to remove the hub, get the bearing number off the face of the outer bearing and then take the seal off the back and pull out the inner bearing to get the number off the face of that bearing as well. With those numbers we can determine the bearings needed to match a hub to your spindle with the new bolt pattern.
The second option is to remove the hub and use a digital caliper like # PTW80157 to measure the axle spindle in the locations where the outer bearing, inner bearing, and grease seal ride. These are precise measurements and I've attached a video and a photo to assist.
With either the bearing numbers or the measurements we can help you get the right hubs for your tire upgrade as long as you don't have an extremely odd spindle size. You will also want to pay attention to the difference in tire diameter from your current tires and account for the suspension travel clearance needed of about 4 inches from the top of the new tire.
Product Page this Question was Asked From
Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 4.80-12
- 12 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can 4.80-12 Tire be Replaced with ST145/R12 Tire Using the Same Wheel
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer hitch
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Search Results: trailer jack
- Shop: Brake Controller
- Search Results: spare tire mount
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Trailer Tires Explained by the Manufacturer Lionshead Tires




