Performance Tool Carbon Fiber Digital Caliper Review

content loading



Customers compare PTW80157 to these similar products




Products Featured in this Video



Review of the Performance Tool Carbon Fiber Digital Caliper


Today we'll be looking at the Performance Tool four inch carbon fiber digital caliper. Part number PTW80157. This allows you to read from 0 to 4 inches or 0 to 100 millimeters. It moves in 100ths of an inch or 1/10ths of a millimeter. It has a nice LED screen. You hit the on button and it's easy to read.

You can switch between millimeters and inches. Right now it's in inches and now it's in millimeters. Just by the touch of a button. We also have our zero capability so when we move it down our measurement tool, if we want to measure something and see the difference between another measurement, we can hit the zero button and it shows us the difference. This is a negative distance or a positive distance.

Take it back to zero and hit the zero button again so we can start back from zero inches or zero millimeters. This allows us to measure the outside diameter or the inside dimensions with the other side. Now we can show you in action. On our trailer here, we pulled off our seal. Usually it's stamped with the measurements on it, but this one has worn off over time. WE can use our tool to find the inner dimension of our race.

2.18 inches. If we need to figure out the outside diameter, that'll be 3.35 inches. Other measurements that we might need to know. Come to our shaft. We've got the bearings that sit on our shaft so we might need to know the diameter of our shaft.

We can come up, be 1.24 inches and that'll be for our inner or our outside bearing. If we need to figure out our other, the larger bearing, the inside bearing, we do the same thing. 1.74 inches. Now if we need to know the difference between the two, we come up we get the inside bearing, we hit our zero button, that zeros it out, and we can come to our outside bearing and we see there's almost a half inch difference between the two bearing sizes. Same works if you want to figure out the dimensions here for our race because that's where it sits. This is where our race sits. If I want to do difference in that. I'll take our meter, I'll measure the inside diameter of our race, I'll hit the zero button, and then I can come and measure the outside distance of our race and see if there's any difference at all. Which, there's not, but if there was it would show us. There would be a negative difference or if I measure something bigger, it would show us a positive difference. That's it for a look at the Performance Tool 4 inch carbon fiber digital caliper. Part number PTW80157.Speaker 2: You can find this and everything else right here at etrailer.com What's up man.


Questions and Comments about this Video

add comment

Info for this part was:

Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Jared G
Installed by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.