Recommended Trailer Fender and Lights for Boat Trailer with 13" Wheels

Question

Question:

I have 13 inch wheels on boat trailer. I need fenders, lights and mounting. I have enclosed pictures. Please advise as to what I need.

asked by: Gregory S

0

Expert Reply:

You can use the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 which are designed to be used with wheels up to 14" large, so they'll work with your 13" wheels. To mount these fenders you'll want to use the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic # PF775-BKT-2; you could also use the existing brackets you've got on your trailer if you'd like.

For the lights, you can use the Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens # MCL65A24B and Red Lens # MCL65RB with Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A65PB.

expert reply by: Erik B

0

click to enlarge

Answer 1

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

view full answer...

Answer 2

I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them…

view full answer...

Answer 3

Hello JT, thanks for reaching out. You are on the right track with your drawing. The etrailer Single Axle Trailer Fender #HP33RR are designed to be bolted on from the top of the step onto a bracket. These specific etrailer brand fenders are a new…

view full answer...

Answer 4

I didn't receive any information about your boat trailer, but I can explain how we classify them for you, which hopefully will help you to decide which fenders you want to go with. If you're only looking to replace one fender, unfortunately…

view full answer...

Answer 5

Thanks for the picture! While we do not have an exact replacement for a Profile 2000 winch we do recommend the Dutton-Lainson Hand Winch item #DL14627 as a replacement. This winch has an 1,800 lbs capacity and will work great with the 20' x…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

First you will need to replace your factory hitch on your 2024 Ford F-350 with the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL27CR. Then you will be able to attach the Rear Tie-Downs #TLR3504 to their receiver. For the front we have the…

view full answer...

Recommended Trailer Fender and Lights for Boat Trailer with 13" Wheels

Products Featured in This Question

Continue Researching