Mounting Bracket Options for Optronics Sealed, Thin Line Clearance Side Marker Light # MC65AB

Updated 07/16/2013 | Published 07/13/2013

Products Featured in This Question

Optronics Incandescent Trailer Clearance and Side Marker Light - Submersible - 2 Bulbs - Amber Lens

(2594)

$5.08

Black Molded ABS Mounting Bracket for Thin Line Series Clearance, Side Marker Lights

(78)

$3.54

Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights

(479)

$5.82

Black Bracket and Single Plug-N-Go Plug for Thin Line Trailer Clearance and Side Marker Lights

(33)

$4.25

Chrome Bracket and Single Wire Plug for Thin Line Trailer Clearance and Side Marker Lights

(77)

$5.70

Chrome Bracket and Single Wire Plug for Optronics ThinLine MC65 Clearance and Side Marker Lights

(9)

$2.91

Question:

Is there a special mount for this lights

asked by: Andy R

Expert Reply:

There are five mounting brackets available that fit the Optronics Trailer Clearance Side Marker Light # MC65AB.

These three are all black plastic. They are Optronics # A65PBPG, # A65PB and # A65B. The first two come with a single wire, the differentiating factor is the # A65PBPG comes with a plug-n-go male connector whereas the # A65PB is intended to be hardwired. The third one, # A65B is the bracket without the wires.

If you would rather have a chrome colored plastic bracket, Optronics has the # A67CBPG that comes with the single wire attached to a plug-n-go attachment and # A67CB which has the single wire for a hardwire attachment.

In the picture you can see the Optronics Side Marker Light # MC65AB and bracket # A65PB, both the front and back so you can visualize how they attach.