Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2

Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2

Item # PF775-BKT-2

lowest price pledge

Our Price: $16.43

Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 2 lbs

Quantity: 
In Stock, Ships Today
Redline 7 Inch Tall Accessories and Parts - PF775-BKT-2
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Trailer Fenders
  • Mounting Brackets
  • Redline
  • 4 Inch Wide
  • 7 Inch Tall
These hot-dipped, galvanized steel brackets are specifically designed to make it easier to mount fender PF775X21W. The brackets bolt to the fender and to the trailer with user-supplied hardware. Call 800-298-8924 to order Redline accessories and parts part number PF775-BKT-2 or order online at etrailer.com. Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (46)
  • Q & A (47)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - PF775-BKT-2

These hot-dipped, galvanized steel brackets are specifically designed to make it easier to mount fender PF775X21W. The brackets bolt to the fender and to the trailer with user-supplied hardware.


Features:

  • Designed for use with fender PF775X21W
  • Bolt onto fender and trailer (hardware not included)
  • Constructed of galvanized steel
  • Made in the USA


Specs:

  • Quantity: 2 brackets
  • Application: Redneck fender PF775X21W
  • Dimensions: 1-1/2" wide x 7" long (long leg) x 4" long (short leg) x 1/4" thick


PF775-BKT-2 Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Trailer Fender PF775X21W (Pair)







Video of Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Trailer Fenders PF775-BKT-2 Review

Today we're going to be reviewing part number PF775-BKT-2. These are the Redline galvanized steel L shaped bolt-on brackets for plastic, single-axle fender, part number PF775X21W. Two brackets are included. These easily just bolt on to the fender and trailer. Hardware is sold separately. It's constructed of a galvanized steel.

Let's go over a few measurements real quick. The longer leg is going to give us an overall length of seven and a half inches, and the shorter leg is going to give us an overall length of four inches. On the longer leg you can see that we have two different size . or two holes. These are the same size, in a square design.

From the center of one to the center of the other it's going to measure three and a half inches. Each one of those square holes is going to give us a diameter of three-eighths of an inch. It is square so that's going to be identical on all sides, and it's going to be identical for every hole. Here on the short side we have four holes. From the center of one to the center of the other, right next to each other, is going to measure seven-eighths of an inch. That's going to be the same for all of them.

The distance from the one on this side to the one on this side is going to give us a measurement of three . I'm sorry, it's going to give us a measurement, center to center, of two and five-eighths of an inch. The brackets are going to measure an inch and a half in width. I do have the fender here that they are designed to go with just to show you how it would actually install. The long leg is going to slide in and then the mounting holes are going to line up perfectly.

You do that one each side. You can install your hardware, and then you're ready to secure the brackets with the short leg to the trailer. That's going to do it for today's review of part number PF775-BKT-2. These are the Redline Galvanized Steel L-Shaped Bolt-On Brackets. .


Customer Reviews

Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2 - PF775-BKT-2

Average Customer Rating:  4.8 out of 5 stars   (46 Customer Reviews)

These hot-dipped, galvanized steel brackets are specifically designed to make it easier to mount fender PF775X21W. The brackets bolt to the fender and to the trailer with user-supplied hardware.

- PF775-BKT-2
by:

really good quality and good galvanizing. Using them for other than fender braces so the quality is important. These are good you cannot go wrong. 646557



- PF775-BKT-2
by:

Easy to apply. Fit and reinforced prope rly 625535



- PF775-BKT-2
by:

Great vendor. Nice, solid product, packaged well and delivered promptly 554702



- PF775-BKT-2
by:

Perfect solution to the situation. 503907



- PF775-BKT-2
by:

I bought these to mount My newly purchased Fulton Plastic Fenders on My Utility Trailer. They were a perfect fit for the Fenders. All that was needed was to drill a few holes, and on went My new Fenders. They came packaged in a small box, inside of a larger box that both of the Fenders were in. The packaging was Excellent, so that they would not bounce around causing possible damage to the Fenders or Boxes during Shipment; which was Very Fast. The brackets are Good Quality, and easily line up, and mount to the Fenders and the Trailer. Very Happy with the Purchase of these. Made it real easy. Thank You Very Much! 503293



- PF775-BKT-2
by:

Heavy duty 495512



- PF775-BKT-2
by:

Brackets worked well after drilling some new holes in trailer frame and and fender plastic. Fender steps can easily support my #185 body weight 493445



- PF775-BKT-2
by:

Heavy duty, worked great with jeep style fenders. 489033



- PF775-BKT-2
by:

These worked out great for the jeep style trailer fenders using 4.80-12 wheels. 489028



- PF775-BKT-2
by:

The fender mount brackets arrived promptly with the other items. The quality is good, but I don't think I would buy these parts again. I think I could fabricate brackets that would work just as well and perhaps easier to mount to the trailer frame. Also, they were quite expensive. 453727



- PF775-BKT-2
by:

arrived quickly, exactly as billed. I am using it as a roof mount for an awning on my SUV...works perfectly. great company interaction & product 443234



- PF775-BKT-2
by:

Excellent heavy duty bracket worked as advertised. 402055



- PF775-BKT-2
by:

Everything was as sold. Parts still going strong. Etrailer was a good company to do business with. 387335



- PF775-BKT-2
by:

This is the second time I ordered these from etrailer. They are really heavy duty and the galvanizing is high quality. PLUS etrailer ships blistering FAST!!! 385242



- PF775-BKT-2
by:

Everything is still working and I can step on the fenders without fear. 370527


Comments

Its all still good.

Lewis H - 04/24/2018

37583

- PF775-BKT-2
by:

Great product, it allowed me to mount Wheel fenders on my kayak trailer! Thanks! 357618



- PF775-BKT-2
by:

Very pleased with our order , got it in excellent time and it was great doing business with E-Trailer 340314



- PF775-BKT-2
by:

Great company to do business!!! 325462



- PF775-BKT-2
by:

These seem to be great brackets. 322736



- PF775-BKT-2
by:

Product was received quicker than expected and was exactly as advertised. These brackets are heavy duty (1/4" thick). I used them for bunk supports on my jet ski trailer and found that they are much better than the brackets that came new on the trailer. I would highly recommend this product to others. 309395



- PF775-BKT-2
by:

The delivery of the brackets was very quick, they shipped out the same day they were ordered and arrived within two days. The brackets are substantial and well made. They are 1/4 inch thick with a heavy galvanized coating and will work well on my boat trailer. They do space the fender out further than my trailer needed, but I attached them to the inside of the frame which worked out well. 304659



- PF775-BKT-2
by:

very pleased 285255



- PF775-BKT-2
by:

As advertised and excellent galvanizing. etrailer.com never disappoints! 283256



- PF775-BKT-2
by:

Worked as needed. Thanks 281305



- PF775-BKT-2
by:

Love the fenders,, They will work great for my car dolly.. And they were $100.00 cheaper than the ones form the manufacture of my car dolly. Thanks Darold 266973



- PF775-BKT-2
by:

Very heavy duty! 257717



- PF775-BKT-2
by:

Pts. were perfect no problems to report 253178



- PF775-BKT-2
by:

Product is exactly as described. 251677



- PF775-BKT-2
by:

brackets and fenders went on easily extending the life of this old trailer 251113



- PF775-BKT-2
by:

very heavy gauge steel. Great support 234088



- PF775-BKT-2
by:

These are quite stout brackets... Should carry a large load. Well galvanized with thick coating of zinc. Very pleased. 226001



- PF775-BKT-2
by:

Super fast shipping and heavy duty quality. Only wish it was easier to find which bolts, nuts and washers I should get. 208530



- PF775-BKT-2
by:

Really sturdy. I was impressed with the quality. 206743



- PF775-BKT-2
by:

My order came very quickly and was in perfect shape. The website was easy to use and the staff is very helpful. 184671



- PF775-BKT-2
by:

I bought these L brackets for construction use as the steel gauge, finish, and quality were twice as good as what I could get at Home Depot and Lowes and half of the price too. Great value! 150790



- PF775-BKT-2
by:

received product in a very timely manner. packaged very well. exactly what I ordered. will buy from them again, thanks. 107082



- PF775-BKT-2
by:

Just what was needed. 96601



- PF775-BKT-2
by:

Brackets worked well with fenders although some modification was necessary to adapt brackets to trailer. I am pleased with the end result especially since I was replacing metal fenders that had failed through corrosion and ware. I feel that the plastic fenders offered a better alternative because I was able to carve out part of the fender to allow a better fit. The metal brackets are much more sturdier than the previous arrangement and I feel the fenders are more aesthetically appealing. 86313



- PF775-BKT-2
by:

strong, well made. going to weld them to my trailer frame to hold 16 ga. fenders I purchases elsewhere. My initial order included (2) Fulton Plastic fenders, was going to use these brackets to install.. Big mistake!! the Fulton Fenders are junk...returned them and ordered 16 ga. steel fenders instead 84936



- PF775-BKT-2
by:

Very sturdy, excellent fast shipping with great communciation. 73295



- PF775-BKT-2
by:

VERY GOOD 59200



- PF775-BKT-2
by:

Product received in a timely manner and in excellent condition. 52753



- PF775-BKT-2
by:

Heavy-heavy duty. When you put these brackets on, nothing will move. 50101



- PF775-BKT-2
by:

Very heavy duty brackets! The holes don't match exactly to the Fulton style b fenders but with a little modification to the fender holes they will do just fine. 35740



- PF775-BKT-2
by:

good for me 27330



- PF775-BKT-2
by:

Item as described with extremely fast s hipping! 23682


47
47

Ask the Experts about this Redline Accessories and Parts
Do you have a question about this Accessories and Part?


  • How are Fulton Trailer Fenders # F008554 Mounted Typically
  • The Fulton fenders part # F008554 are universal in that they can mount a number of ways depending on the trailer. I attached a picture that shows a very common way. Or you can use L-brackets like part # PF775-BKT-2 which are commonly used as well.
    view full answer...

  • How to Install the Fulton Single Axle Trailer Fender on a Tow Dolly
  • The Fulton Single Axle Trailer Fender with Top Step # F008554 is designed to fit tire on a 14 inch wheel. The dimensions are: 9.7" wide x 31.3" long x 12.75" tall. The top step is 8 inches wide and it has a capacity of 300 lbs. You can attach it to your tow dolly using brackets, like part # PF775-BKT-2, or you can simply bolt it straight onto your tow dolly if you have the space to do so. I have attached a picture that a customer sent in where they installed it using the second option. If...
    view full answer...

  • Replacement Parts to Rebuild Trailer Suspension on 1976 EZTrail
  • All of the products you listed will work together just fine. Keep in mind, if your current springs are not 26 inch springs, like the # SP-124275 you referenced, your hangers, # APS4, will not be in the exact same position as your current ones. When repositioning everything the most important factor is keeping the axle in the same location it currently is. The U-Bolt Kit # APUBR-10 is correct for a 2,000 pound axle and the Shackle Bolt # 166081 will work too. It's hard to tell by the...
    view full answer...

  • Recommended Mounting Bracket For Fulton Single Axle Plastic Fender
  • We do carry mounting brackets that are designed for plastic trailer fenders like the Fulton Single Axle Fender # F008582. I recommend a bracket like part # PF775-BKT-2. I have attached a photo of the mounting bracket with the dimensions noted you can check out.
    view full answer...

  • Brackets Needed to Mount Fulton Single Axle Trailer Fenders with Top and Side Steps F008584-2
  • You will need 4 of bracket # PF1135-BKT to mount fenders # F008584-2. Because your frame is so narrow you will need to drill a hole in each bracket to accept u-bolts that fit around your frame. We do have some 1-1/2 inch wide, 5 inch long u-bolts you could use, # SP01-120, sold as a pair. You would need 2 pair. If you don't mind drilling into the trailer frame you could also use # PF775-BKT-2 and place them wherever you can on both the fender and the trailer. You would need 2 pairs of...
    view full answer...

  • How to Mount a Fulton Plastic Trailer Fender to a Trailer
  • You can use the hardware and mounting brackets from your original fenders, or I recommend L-shaped brackets, like part # PF775-BKT-2, to mount the fender to your trailers frame. I have attached a link to our product page of mounting brackets we have for trailer fenders. I recommend the L brackets. The one end would be up underneath and the other end would attach to the trailer frame through that skirt. I will include a picture that should better illustrate this.
    view full answer...

  • Could Fulton Fenders # F008584 be Attached to C-Channel Frame with Brackets # PF775-BKT-2
  • Does the C of the frame open to the inside or the outside of your trailer frame? If to the inside the brackets part # PF775-BKT-2 should work fine. If to the outside you'd probably need to take the trailer and the fenders to a fabricator near you who'd be able to make you a bracket that would work.
    view full answer...

  • How to Support the Step of a Plastic Trailer Fender
  • We typically recommend the part # PF775-BKT-2 as a way to support the steps of a plastic fender like your # F008575. I attached a picture that shows how they would be used.
    view full answer...

  • Comparing the Redline # PF775X21W and Fulton # F008549 Fenders for 8
  • Aside from the mounting holes being different, because the Fulton is 2 inches longer, the only other difference between the Redline # PF775X21W and the Fulton # F008549 fenders is that the Fulton version has a step that can hold up to 300 lbs. They both are White and made from a plastic that is durable and will resist corrosion much better than a steel option. You are correct that Fulton does not offer a design that fits the exact same mounting holes as the Redline version so if you...
    view full answer...

  • Recommended Fender Bracket for Use with Fulton Trailer Fender # F008553
  • The recommended fender brackets to use with the Fulton Fender part # F008553 is the Galvanized Steel, L-Shaped, Bolt-On Brackets # PF775-BKT-2. Without what kind of brackets you currently have on your trailer it's hard to say for certain, but most likely you could use them to install the # F008553 . I attached a couple review videos for you to check out as well.
    view full answer...

  • Replacement Fender for Shorelander Trailer with Single Axle, 13 Inch Wheels
  • For a fender like you described, you will want to use the Fulton Single Axle Trailer Fender with Top Step # F008553. This fender is designed to work with 13 inch wheels like those on your trailer. The # F008553 fender is made of black plastic and will provide you with a step on top of the fender. This fender is designed to be mounted with brackets like # PF775-BKT-2. I have attached a chart showing the measurements for this fender, as well as a review video of the fender. We do not...
    view full answer...

  • Brackets for Attaching the Fulton Plastic Fender with Top Step # F008549
  • Attachment of the fenders to your trailer will depend on your trailer construction. We have several styles of galvanized brackets that you can use to attach fenders to a trailer frame. We have L brackets like the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender, item # PF775-BKT-2, and we have galvanized U-brackets like the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender, item # PF1135-BKT-2. One of these styles should work for...
    view full answer...

  • Recommended Trailer Fender with Step On Front and Back Side That Bolt Onto Aluminum Trailer
  • It sounds like you want a fender like the Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 13" Wheels - Qty 1 # F008583. This fender has 28 inches between the mounting bracket slots. If you move up to the 14 inch wheel version # F008584 the measurement between bracket slots is 30-1/4 inches. These are available in different colors. You can use bolt on brackets like # PF775-BKT-2 to mount them.
    view full answer...

  • How to Mount a Fulton Plastic Fender # F008553 To a Trailer To Support Weight of Stepping On It
  • The Fulton Plastic Fender with Top Step, part # F008553, does not come with mounting hardware. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use the Redline Galvanized Steel, L-Shaped, Bolt-On Brackets, part # PF775-BKT-2. See picture to the right that will show the underside of the fender with the brackets to give an idea of how to mount it to your trailer. I would recommend to install the fender with L-shaped...
    view full answer...

  • Does the Fulton Plastic Fender with Top Step # F008554 Require Mounting Brackets
  • You will need to mount the Fulton Plastic Fender with Top Step, item # F008554, using existing mounting brackets or by making mounting brackets to mount the fender. We do carry fender mounting brackets for another style of fender that may work for you. The Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Trailer Fender PF775X21W (pair), item # PF775-BKT-2, is designed for use with the Plastic, Single-Axle Trailer Fender, item # PF775X21W, and does not include mounting...
    view full answer...

  • How to Mount a Fulton Black Plastic Trailer Fender for 14 Inch Tires
  • The great thing about the plastic fenders like # F008554 is that because they require the user to determine the best method of mounting them, you can attach them to the trailer based on what you have available. You can add brackets # PF775-BKT-2 if needed but ultimately as long as they are properly secured it is up to you. You may need to relocate or bend the lower bracket somewhat though based on the measurements of the fender.
    view full answer...

  • Which Mounting Brackets Can be Used to Attach the Fulton Plastic Fender # F008573 to a Boat Trailer
  • Yes, the Fulton Plastic Fender, item # F008573, has two mounting slots for mounting brackets. These slots are 4 inches wide and have mounting holes on the inside that are 3-3/4 inches on center apart. From the inside of the fender to the center of the first hole the distance is 2-1/8 inches. A photo, with these dimensions, is added at the right for you to review. We have the Galvanized Steel, L-Shaped, Bolt-On Brackets, item # PF775-BKT-2, that should work to mount these fenders to your...
    view full answer...

  • Mounting Hardware Recommendation For Fulton Trailer Fender
  • The Fulton Single Axle Trailer Fender, part # F008563, does not come with mounting hardware included. You can use the hardware and mounting brackets from your original fenders, or use L-shaped brackets, like part # PF775-BKT-2, to mount the fender to your trailers frame. I have attached a link to our product page of mounting brackets we have for trailer fenders.
    view full answer...

  • How to Choose the Correct Boat Trailer Fender
  • What determines the size fender you need is your trailer's wheel size. The fender in your photo looks like the model from Redline. The smallest version of this we carry is # PF775X21W and is for wheels that are between 8" and 12". It is 7-3/4" wide x 21" long x 5-1/4" tall and requires installation brackets # PF775-BKT-2. If you have wheels that are 13" you may want to take a look at the Fulton # F008543 which is 9" wide x 29-1/4" long x 12" tall. I have added links to video reviews...
    view full answer...

  • What Do You Use to Mount Plastic Fenders to a Tow Dolly
  • Usually customers will use a couple of L-brackets, such as # PF775-BKT-2, to mount a replacement fender. You would need to drill holes in the fender so the studs on the trailer can go through. Then attach the brackets. I included a picture showing an example. You don't have to bolt through the top of the fender like in the picture. That is just one way it can be done. If the plastic fenders have steps like # F008574 the steps would cover where the brackets attach to the fender so you...
    view full answer...

  • What is the Spacing on the mounting Holes for Trailer Fender PF775X21W
  • I went out to the warehouse and pulled trailer fender # PF775X21W. The holes on the top are 3-9/16 inches apart on center. The holes are 3/8 to 7/16 inches wide (there is a little room for tolerances since the plastic can expand and contract a little). You can use mounting brackets # PF775-BKT-2 to mount the fender.
    view full answer...

  • How Many # PF775-BKT-2 Brackets are Needed Per Fender
  • You'd need two brackets per fender, so for two fenders, you'd need two of part # PF775-BKT-2.
    view full answer...

  • Fender Bracket Recommendation for Use with the Single Axle Trailer Fender F008541
  • The fender brackets we carry like the part # PF775-BKT-2 do have 3-1/2 inches between the mounting holes. These are the only ones we currently sell so to use them with the Fenders # F008541 you would either need to drill new holes in the brackets or the fenders. It would certainly be easier to drill through the plastic, but for a cleaner install you might instead drill through the brackets.
    view full answer...

  • How to Use Redline Brackets PF775-BKT-2 to Install Plastic Trailer Fenders
  • To install the fender part # F008559 with the brackets # PF775-BKT-2 you will need to do a bit of modifying as the two can work together, but they are not designed specifically for each other. If you check out the picture I attached you will see how the brackets will install in a similar fender. You will need to use that as a guide for how to attach the fenders with the brackets.
    view full answer...

  • Will Fulton Plastic Fenders Fit on a 2000 EZ Loader Single Axle Trailer with 13 Inch Wheels
  • The Fulton Plastic Fender, # F008573, is designed to work on trailers with 13 inch wheel and tire combinations like your EZ Loader trailer. The fender will require a mounting bracket. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use L brackets, # PF775-BKT-2, to mount the fender to your trailer frame. Some modification of the fender or trailer mounting brackets may be required.
    view full answer...

  • How to Mount the Fulton Plastic Trailer Fenders
  • You can mount the fenders directly to the trailer frame through the fender skirt on the back of the fender. I would recommend using large washers if you drill through the fender skirt and attach the fender directly to the trailer frame. If mounting directly to the trailer frame is not possible on your trailer, you will need to use brackets to attach the fenders. We have the Galvanized Steel, L-Shaped, Bolt-On Brackets, item # PF775-BKT-2, that could be used to mount these fenders, #...
    view full answer...

  • Recommended Mounting Brackets for the Fulton Single Axle Trailer Fender
  • We have the Galvanized Steel, L-Shaped, Bolt-On Brackets, item # PF775-BKT-2, that should work to mount these fenders to your trailer frame. If these brackets will not accommodate your trailer frame, you may need to have brackets fabricated to attach fenders.
    view full answer...

  • How to Determine Proper Spacing Between Tire and Fender for Clearance on 3000 LB Trailer
  • Great question. As a general rule, when your trailer is loaded to it's full capacity, there should be a minimum clearance of 3 inches between the top of your tire and the underside of your fender.This should give you adequate clearance for potholes and bumps. If you want to get precise, on an underslung trailer (the springs are mounted under the axle), you should measure the distance between the bottom of your frame and the top of your axle. Add two inches to that measurement and you...
    view full answer...

  • Fender Brackets to Mount Fulton Single Axle Trailer Fender w/ Top Step Plastic Fender # F008551
  • The Fulton Single Axle Trailer Fender with Top Step Plastic Fender, # F008551, is designed to be mounted with your existing hardware. If your hardware is missing or needs to be replaced, you could use an L-Shaped bracket like the Galvanized Steel Bolt-On Brackets, # PF775-BKT-2.
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.