Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These hot-dipped, galvanized steel brackets are specifically designed to make it easier to mount fender PF775X21W. The brackets bolt to the fender and to the trailer with user-supplied hardware.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be reviewing part number PF775-BKT-2. These are the Redline galvanized steel L shaped bolt-on brackets for plastic, single-axle fender, part number PF775X21W. Two brackets are included. These easily just bolt on to the fender and trailer. Hardware is sold separately. It's constructed of a galvanized steel.
Let's go over a few measurements real quick. The longer leg is going to give us an overall length of seven and a half inches, and the shorter leg is going to give us an overall length of four inches. On the longer leg you can see that we have two different size . or two holes. These are the same size, in a square design.
From the center of one to the center of the other it's going to measure three and a half inches. Each one of those square holes is going to give us a diameter of three-eighths of an inch. It is square so that's going to be identical on all sides, and it's going to be identical for every hole. Here on the short side we have four holes. From the center of one to the center of the other, right next to each other, is going to measure seven-eighths of an inch. That's going to be the same for all of them.
The distance from the one on this side to the one on this side is going to give us a measurement of three . I'm sorry, it's going to give us a measurement, center to center, of two and five-eighths of an inch. The brackets are going to measure an inch and a half in width. I do have the fender here that they are designed to go with just to show you how it would actually install. The long leg is going to slide in and then the mounting holes are going to line up perfectly.
You do that one each side. You can install your hardware, and then you're ready to secure the brackets with the short leg to the trailer. That's going to do it for today's review of part number PF775-BKT-2. These are the Redline Galvanized Steel L-Shaped Bolt-On Brackets. .
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lewis H.
4/24/2018
Its all still good.