HappiJac Camper Tie Downs that Fit 2004 Dodge Ram 2500 Long Bed

Question

Question:

Well this fit a 04 dodge diesel 2500 8ft bed

asked by: Louis B

0

Expert Reply:

We do have a HappiJac set of camper tie downs that do fit your 2004 Dodge Ram 2500 long bed with the part # LC182908-182928 but the part number you mentioned does not fit and would not work.

expert reply by: Jameson C

0

Answer 1

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 2

The SumoSprings Helper Springs, #SSR-302-54, will operate with no issues under normal driving conditions. The springs are designed to begin to impact the truck's suspension when the suspension is under a load. The OEM suspension components, like…

view full answer...

Answer 3

The best no-hassle option for stiffening your truck suspension when it is loaded with your slide-in camper is a set of Timbren jounce springs. These and all other suspension enhancement options for your rear axle are shown on the linked page. These…

view full answer...

Answer 4

Jounce-style helper springs are easier to install than air bags since they're less parts involved. Also, once they are installed you basically leave them alone. Air bags need to have the air pressure monitored and changed according to the load…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Jim, thanks for reaching out! The DeeZee Custom-Fit Truck Bed Mat #DZ28GJ will fit your 2024 Ram 3500 as long as it's an 8' bed, the TorkLift Tie Downs #TL75FV will fit the truck as well, and then the TorkLift Locking FastGun Turnbuckles…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

HappiJac Camper Tie Downs that Fit 2004 Dodge Ram 2500 Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching