Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Great Prices for the best truck camper tie downs from TorkLift. TorkLift Camper Tie-Downs - Custom Frame Mount - Rear part number TLD3113 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (2236)
Q & A (0)
Related Parts
Photos
Used (1)
TorkLift Truck Camper Tie Downs
- TLD3113
Highlights
Stable Camper Ride: Frame mounts spread weight evenly and lower your center of gravity for steady handling.
Damage-Free Install: Uses existing frame holes with little to no drilling or truck modification.
Clean Look When Unloaded: Removable arms keep brackets nearly invisible under your truck.
Rust-Resistant Strength: Black powder-coated steel stands up to corrosion and road wear.
Secure, Adjustable Hold: Two anchor holes let you fine-tune tension and turnbuckle angle.
Features to know about
Stable Camper Control: Frame-Mounted Tie-Downs
These rear tie-downs mount directly to your truck’s frame, creating four secure anchor points that keep your camper steady and balanced on the road. Because the frame is the strongest part of your vehicle, it stops the camper from shifting or swaying, even on long hauls or in crosswinds. The design lowers the camper’s center of gravity and distributes weight evenly for stable handling and a smoother ride.
Install Without Drilling: Custom-Fit Mounts
These tie-downs bolt right into pre-existing holes in the frame, so installation requires little to no drilling or modification. The tight, custom fit means there’s minimal loss of ground clearance and no need to alter your truck’s structure. Once installed, they sit snug against the frame so you can head out without worrying about loose hardware or a poor fit.
Keep Your Truck Looking Clean: Removable Arms
When you’re not hauling a camper, you can remove the arms from the brackets and hardly notice they’re there. The brackets stay tucked beneath the truck, nearly flush with the underside, keeping everything looking neat and uncluttered. It’s a simple design that keeps your setup functional when needed and out of sight when not.
Built Tough: Black Powder-Coated Steel
Made from heavy-duty powder-coated steel, these tie-downs are built to resist corrosion and stand up to rough use and weather exposure. The durable finish helps protect against rust and wear over time, so you can depend on them for season after season of travel.
Each tie-down arm includes two pin holes, letting you extend or retract them for the best reach to your camper’s anchors. The plates feature two anchor holes for fine-tuning your angle—important for keeping your camper firmly in place from multiple directions. This adjustability ensures a solid hold while avoiding contact with your truck’s body.
Specs
Construction and Material
Material: Black powder coated steel
Corrosion Resistance: Powder coating to resist corrosion
Mounting Type: Frame-mounted
Mounting Hardware: Includes installation hardware
Drilling Requirement: Uses pre-existing holes in the frame - little to no drilling required
Configuration and Fit
Mount Location: Rear
Fit Type: Custom fit to vehicle
Adjustability: Adjustable arms extend from truck body to clear bowed sidewalls and fenders
Anchor Options: Two anchor holes to achieve best angle for secure hold
Compatibility: Pairs with front tie-downs (sold separately)
Performance and Handling
Function: Creates attachment points for securing camper to truck bed
Load Distribution: Distributes weight evenly and lowers center of gravity
Ground Clearance: Mounts tight to vehicle frame - minimal loss of ground clearance
Design Benefit: Avoids top-heavy setup vulnerable to strong winds and sway
Installation and Use
Installation: Custom fit, no-drill installation
Connection Method: Requires turnbuckles (sold separately) to attach camper to tie-downs
Adjustable Length: Two pin holes per arm for extension adjustment
Design: Removable arms for low-profile appearance when not in use
Anchor Alignment: Offset tie-down and anchor points for multi-angle hold
Included Items
Included Components: 2 rear tie-downs and installation hardware
Warranty and Origin
Warranty: Lifetime warranty
Country of Manufacture: Made in the USA
D3113 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
This Product Fits The Following Vehicles
2019 - 2028 Ram 2500 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
WARNING: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Customers Who Purchased This Truck Camper Tie Downs Also Bought...
They installed pretty easy. However the business end twists in the receiver when put under tension. I’m disappointed that it’s not a tight fit especially for what they cost. 3350566
Went out last Thursday and installed both rear tie downs in just over 30 minutes! Great product and barely visible without extensions installed 3453505
by:
Bruce
09/26/2025
Very well made. everything came with tie downs to install. Will take pics when installed 3418366
by:
Justin U
04/19/2023
Great product and easy install. 90 minutes to install the best mounts around. 1559865
(this is, verbatim, the same review I gave for the front set of tie-downs) I wasn't planning on purchasing a new set of Tie-Downs, but having my truck totaled by a careless driver, changed that plan. Bought the front and rears to install on my new 2021 Ram 2500. Installation was a snap, literally under an hour for the set of four. Using them to secure my Lance 650, they have worked as excellently as the previous set did (may they rest in peace). as usual, etrailer's sales and service were top shelf. 1450348
by:
Gerald
12/05/2021
This frame mounted camper tiedown was well made and as advertised required no welding. As I recall there were errors in the torquing requirements some of which were beyond what I could do by hand even with an extension on the wrench. The big advantage of this system is that you can take off the extension that actually connects to the tie down, so nothing is sticking out from the truck when the camper is off. 1217965
by:
Wayne
09/22/2022
Shipped fast, well ahead of expected date.
The manufacturers written installation instructions were appalling and the few videos I found online from them were less than not helpful. (I work for a manufacturer myself and was shocked at this).
Were it not for etrailers videos I could not have figured installation out. I say figure it out because understandably I didn’t find model specific videos but enough information to see how they should install.
So, TorkLift gets 5 product stars/-10 installation instruction stars and etrailer gets 5+ stars all around! 1435607
by:
Robert
10/16/2022
I installed these on a 2019 Ram 2500 Laramie with a 6.7L Cummins, 6.5 foot bed length, running boards on the cab, and a factory hitch. I'm not a gear head (auto mechanic) and the install was pretty straight forward and not complicated. Great product and the delivery was quick. Hope this helps others in determining fitment for purchasing. 1450103
by:
Doyle
09/18/2022
The instructions were clear and easy to follow. They fit just as described and took 2 hours to install. No holes put Quick shipping to. in pickup and easy to tie camper down. Like that they don't stick out past box when not in use. 1413075
by:
Richard
06/29/2023
I really like the way the truck and camper ride, very stable. The ability to remove the extensions when the camper is off is really a nice feature too. 1612820
by:
Benjamin
09/18/2021
Easy installation and a very solid mount. Finish looks to be holding up well. Had HappiJac on my last truck, and that worked fine, but this is superior in most respects and requires no drilling. 1155971
by:
Stan
03/14/2024
These with a set of fastguns and you're all set. 1747580
by:
William D.
06/03/2022
I haven’t installed it yet, but product appears very high quality. Also they have excellent customer service and have dealt with a couple of shipping issues I had in a very timely manner… 1308218
by:
Scott
07/20/2023
Install was a little complicated. Removing parking brake cable was a pain. 1627763
by:
Caitlin
08/16/2021
Our order arrived 2 weeks before we expected, just in time for our first trip with our truck camper. The installation was smooth and everything feels great! 1125013
by:
Mel
09/29/2021
Good tie downs, functioning well with no problems. 1165345
by:
William
08/20/2021
These are great! I have the rear step so I modified the left side solid as a rock! Still have my step. 1129172
by:
Conrad
05/25/2021
Awesome product, great fit up. Good hardware, heavy-duty brackets. Thick nice powder coating. Worth every penny. 1046705
by:
Jason
02/22/2022
This has got to be one of the most straight forward installs I have ever done . Rears only took 20 minutes to install, and the fronts 40 minutes due to the emergency break cable. If you stop and read the instructions, they provide a clear picture on how to complete the setup. Very stout and worth it. 1267206
by:
Jeff
06/20/2025
Installed easily and fits.3353396
by:
Doug
12/29/2021
Easy installation. Works great.1233342
by:
Cody
11/13/2021
Very clear install instructions. Great fit-up! Super easy install! 1202839
Possibly, but I would need to know more info on your truck to be sure. What is the Year Make Model, bed length, cab style, what trailer hitch do you have, do you have step bars? Do they go under the truck bed or stop at cab? view full answer...
They sure will Travis. The TorkLift Camper Tie-Downs item # TLD3113 will indeed fit your 8' bed 2022 Ram 2500. These work with the factory hitch. If you upgraded to the TorkLift Super Hitch Magnum, you'll need item # TLR3510.
For the front tie-downs you'll need the TorkLift item # TLD2140. You'll also need a set of turnbuckles to secure your camper. For locking stainless turnbuckles, use item # TLS9529-2-LK for black, item # TLS9522-2-LK for gray or item # TLS9526-2-LK for polished stainless.
What... view full answer...
The aluminum TorkLift Talon Camper Tie-Downs # TL94FR that would fit your 2022 Ram 2500 will not fit with the running boards that you have. With how these mount the running boards have to end with the cab and can not extend past it at all. If you wanted to remove the running boards this option will work along with part # TL45RR for the rear.
If you don't want to remove the running boards then you can use part # TLD2142, which is powder coated steel, for the front and part # TLD3113 for... view full answer...
We do have camper tie-downs that will fit on your 2019 Ram 2500 but since you have the running boards none of the TorkLift Tie-Downs will fit. You could use parts # TLD2140 and # TLD3113 if you removed the running boards (or steps) but since I doubt that's something you want to do we need to look into alternatives.
One of the most popular options on our site is the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF which you would use with the Turnbuckles # TDHP. These drop into your... view full answer...
Torklift makes the best frame mounted camper tie downs so for your 2020 Ram 2500 with factory boards, short bed, and a factory hitch you'd want the part numbers # TLD2142 and # TLD3113 and you'd be set.
You would also need a set of turnbuckles to attach from the tie down brackets to the camper itself like the Torklift FastGun Turnbuckles part numbers # TLS9529-2-LK. These are stainless steel and come with locks plus are easy to use. view full answer...
For the front tie-down, you'd use the Torklift # TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed.
If you have the factory hitch, use # TLD3113 for the rear, or if you have the TorkLift Super Hitch Magnum, use # TLR3510.
There are a couple of fit caveats:
• Product does not fit vehicles with aftermarket Mopar rear-mounted kick out steps that are mounted under the
bumper.
• On dually trucks, the rear camper anchor... view full answer...
For a 2022 Ram 2500 with a 6.5' bed you'll need the TorkLift Camper Tie-Downs # TLD3113 for the rear. For the front you'll need part # TLD2140 if you have no running boards or running boards that end before your bed. If you have running boards that extend under the bed then you'll need part # TLD2142 instead.
To complete your setup you'll also need turnbuckles like part # TLS9020 to secure the camper to the tie-downs. view full answer...
The difference is the part # TLD3113 fits the 2020 Ram 2500 and the part # TLD3112 fits the 3500 models. They are not interchangeable. Since you have a 2500 model you would want the TLD3113. view full answer...
The Rear # TLD3113 TorkLift Camper Tie-Downs are not compatible with the AMP Research Bed Step on your 2022 Ram 2500. These parts both mount in the same location on your Ram, but you can swap them out since you will not need the step when you have the slide in camper in the bed. You will also need the Front # TLD2140 Tie-Downs and TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure the slide in camper in your 6'4" bed. view full answer...
I have a solution for you, but the HappiJac Custom Tie Downs # LC182910 is not going to fit on your 2019 Ram 2500 short bed; these are actually designed for Ford trucks. You'll need to determine the correct tie down for your 2019 Ram 2500 short bed by the type of hitch you have installed, and whether or not you have a board or step extending out or underneath the bed of your truck.
For example, if you've got a 2019 Ram 2500 short bed without the board or step, you'll want to use the TorkLift... view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLD2140 and # TLD3113, front and rear will fit your 2020 Ram 2500, tie-down inserts, frame brackets, and all necessary hardware is included.
As for turnbuckles there is a wide selection at varying price points that will work. The primary difference being features and ease/time to install. The TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs, # TLS9050A, (35" - 45" reach) are a stainless steel single-piece construction... view full answer...
For your 2022 Ram 2500, you can use the below listed camper tie-downs from TorkLift.
- TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2140
- TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3113
These fit 2022 Ram 2500's with a step or without and whether you have a 6-1/2' bed or 8' bed. view full answer...
Torklift has a front camper tie down that fits the 2021 Ram 2500 that has running boards that run under the bed as well with the part # TLD2142. The # TLD2140 you referenced only works if the boards stop at the cab. Then for the rear tie down setup you'd want the part # TLD3113 and you'd be set. These do not affect your sway bars either. view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3113 and # TLD2140 are confirmed to fit select models of the 2019 through 2022 Ram 2500 and 3500. If you need help determining the correct camper tie-downs for your truck then I'll just need to know the following information:
Year
Make
Model
Bed Length
Whether or not you have a factory hitch
If you have steps or running boards that extend past the cab under the bed view full answer...
If the running boards do end right at the cab then you can use the TorkLift # TLD2140 for the front. TorkLift lists that if the running boards extend even a little past the cab to use part # TLD2142 instead. For the rear you can use the TorkLift # TLD3113. You will most likely have to remove the flip-down step in order to get the rear tie-downs in place.
To complete the setup you'll also need some turnbuckles like part # TLS9020. view full answer...
If you are looking for TorkLift camper tie-downs that are compatible for your 2021 Ram 2500 (8-ft. crew cab) with running boards and a factory hitch, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2142 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3113. Both of these sets come with tie-down inserts, frame brackets, and necessary hardware for installation. The inserts can be easily removed from the receivers with included pins. Also, there... view full answer...
Yes, the TorkLift camper tie-downs you asked about will fit the front and rear of a 2020 Ram 2500, but have certain requirements. The tie-downs will fit so long as you have running boards extending under the truck bed and either a factory installed hitch or the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1112-30.
They are a fit for any cab for the 6-1/2 foot bed but Crew Cab only for the 8 foot bed.
If your 2020 Ram 2500 meets all those requirements you can use the following:
-... view full answer...
The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 2500 Crew Cab 6.5' Bed Factory Hitch (No Running Boards or Cab Only Running Boards) is part # TLD2140 for the front and part # TLD3113 for the rear. If you don't already have turnbuckles, I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9526-2-LK. view full answer...
The correct TorkLift tie-downs for your 2020 Ram 2500 are the following:
Front Steel - # TLD2140
Front Aluminum - # TL94FR
Rear Steel - # TLD3113
Currently (July 2020) there are no rear aluminum options. view full answer...
I checked with the manufacturer, TorkLift, and so long as your 2019 Ram 2500 Crew Cab has either the factory hitch or the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1112-30, the tie-downs will fit with cab-length running boards/steps, even those that retract.
The correct part numbers for the tie-downs for your '19 Ram 2500 are the following:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2140
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3113
These... view full answer...
For your 2020 Ram 2500 crew cab that will have running boards and a factory hitch you'd need the Torklift camper tie downs part number # TLD2142 and # TLD3113 and you'd be set! view full answer...
Yes you are correct the Power Wagon is basically just a 2020 Ram 2500 with minor changes so the Torklift Camper Tie Downs you mentioned of # TLD2142 and # TLD3113 are perfectly compatible. For turnbuckles then you could use the stainless steel part # TLS9529-2-LK and you'd be set in that regard as well. view full answer...
There is a significant enough of a difference between a 2017 Ram 2500 and a 2021 Ram 2500 that there had to be a different front hitch made so you'd need the Curt # C31089 that you referenced.
The Torklift camper tie downs for your 2021 Ram are the part # TLD2140 and # TLD3113 which also are different from the older truck you have so they would have to be replaced as well. view full answer...
Yes we do have Torklift camper tie downs that fit your 2024 Ram 2500 with the part numbers # TLD2140 and # TLD3113. This is the correct fit for your long bed, crew cab, with cab length running boards, and a factory hitch. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.