Should I Use the TorkLift StableLoads or Air Bag System on a 2022 Ford F-350 with In-Bed Camper?

Question

Question:

I came here looking for air bags for my 2022 F350, but was intrigued when I saw these. I have an Arctic Fox 992 that’s probably around 4500-5000 lbs loaded/wet. Thing is, it’s already sitting on the overloads… at that I’m wondering does it make any difference to use these, or are airbags better for my application? I would like to be a little more level and have less sway. I don’t think this would change the sway at all since I already have the overloads helping in the current situation. Thanks!

asked by: Dakota

0

Expert Reply:

There are a couple things to consider between using the Torklift StableLoad # TLA7200 and air bags on your 2022 Ford F-350 Super Duty when transporting your in-bed camper. If you are just looking to decrease sway, the Torklift StableLoad # TLA7200 is a simple way to accomplish this when hauling your camper. The advantage of this route is that once you install the StableLoads, it doesn't require additional maintenance and upkeep like air bags.

However, you will not get the customization and overall increased control that you receive from air bags. Since you inputted a 4-wheel drive option into our fitguide, I assume that is what you have on your 2022 Ford F-350. I recommend going with either the AirLift LoadLifter 5000 # AL76KV (for dually models) or the # AL23FJ (for single rear wheel models). With the LoadLifter 5000, they not only come with 5,000 pounds of load-leveling capacity, they also come with the ability to inflate the air bags to your desired firmness with the camper loaded. This gives you greater overall control than the StableLoads. Also, with the air bags, they activate instantly on your suspension. The benefits of the air bags are more comprehensive than the benefits you receive from the StableLoads.

To add even more customization to the air bags, I recommend a compressor system like the # AL25856 or the wireless # AL58WQ. Since both of these compressors are dual-path models, you can inflate the air bags independently from the comfort from your cab. In addition to the Bluetooth capability of the # AL58WQ, it provides you with constant advanced diagnostic alerts to let you know that the air bags are working safely and efficiently.

I went ahead and linked some helpful videos for you to check out.

expert reply by: Bob C

0

Answer 1

Hey Craig, thanks for reaching out. Yes, they will! The TorkLift StableLoad Suspension Upgrade #TLA7200 will indeed work with the Timbren bump stops on your 2025 Chevy 3500HD. The StableLoads mount under the overload spring, while the bump stops…

view full answer...

Answer 2

Hey David! That isn't the main purpose of the Softride Shuttle Pad Tailgate Pad #SR26457 but it will protect your tailgate while it is down. Keep in mind, you probably won't get 100% coverage, particularly on the sides. This is 61" wide…

view full answer...

Answer 3

Hey Tony, based on how the Timbren kit part #TFRTT350J installs I do not see how your overload spring spacer block would interfere with it so this would work for you. Is that block that you have designed to engage the overload springs a little sooner…

view full answer...

Answer 4

Hey Debbie, The Weigh Safe Flap Jacks, #WS88ER, have a capacity of 6,000lbs per block. With that set of 4 you are getting 24,000lbs of support which will be plenty for your 5500lb camper. These will work great for you as support. What vehicle do you…

view full answer...

Answer 5

I talked to some of our guys down in our installation bays and based on the feedback I received, I definitely recommend the Timbren Suspension Enhancement System #TFR350SDJ for your 2020 Ford F-350 Super Duty. The TorkLift StableLoad #TLA7310S work…

view full answer...

Answer 6

Yes, the Torklift StableLoad #TLA7311 will indeed work with an air bag kit. This is actually a combination we recommend fairly frequently as the two work very well together. The StableLoads will preload the overload spring which will add support to…

view full answer...

Answer 7

Hey Paul, there really isn't any downside to going with the 7500 rated Air Lift kits like the part #AL57575 over the 5k rated kits aside from them costing a little more so for you I would definitely recommend the #AL57575. Are you wanting a…

view full answer...

Answer 8

From the looks of the photo you have attached it appears you have a lower overload spring, not an upper overload spring that is required for the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs part #TLA7200 to work. This kit will…

view full answer...

Answer 9

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 10

Hey, Randall! I did some digging and I keep getting results showing that your camper should have 7,000 lbs Dexter axles. You would want to make sure just in case. If you're unsure you can check the stamp on the hub for a number, all Dexter hubs…

view full answer...

Answer 11

Hey Roger! Since your 2024 Ford F-350 is a 4WD model the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR will fit. The only other requirement is that the truck is at stock height so as long as you haven't added a lift kit you're all…

view full answer...

Answer 12

Definitely, Mike. The 12-ton Tallboy #PM94FR has more than enough power for your dually’s front axle. The main thing to check is clearance - it needs about 11-1/4 inch minimum height to fit, so measure under your lower control arm or frame first.…

view full answer...

Should I Use the TorkLift StableLoads or Air Bag System on a 2022 Ford F-350 with In-Bed Camper?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching