The Difference Between A Weight Distribution System and Weight Distribution System With Sway Control
Updated 04/07/2020 | Published 04/06/2020
Products Featured in This Question
Question:
Does this utilize friction sway control at the bracket location? What are the differences between this product and the Fastway e2... they look very similar?
asked by: Larry W
Expert Reply:
The Reese Weight Distribution System w Shank - Round Bar part # RE34FR does not utilize friction sway control. It is simply a weight distribution system that will redistribute the weight of your setup with the spring bars which will help to reduce sway but does not have active sway control at the bracket locations. A system like the Reese WDS RE34FR will help to eliminate rear sag of the tow vehicle and distribute the weight but it will not do much for sway. If you are experiencing sway when a big truck passes you on the highway or there is a gush of wind then you want built in sway control with your system.
The Fastway e2 Weight Distribution systems like part # FA94-00-0800 uses 2 points of steel on steel friction to help keep the trailer in a straight line when going down the road. Once the trailer begins to sway the direct steel to steel friction of the spring bars in the brackets creates resistance to eliminate the side to side movement.
If you are experiencing sway, the Fastway e2 FA94-00-0800 is a great option if the loaded tongue weight of your trailer falls between 400 lbs - 800 lbs. You wan't the loaded tongue weight of your trailer to fall in the middle of the tongue weight range rating of the spring bars to have a properly rated system for your trailer. You will also need a hitch ball with 1-1/4" shank for that you can use part # EQ91-00-6080 for a 2" ball or part # 63840 for a 2-5/16" ball.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Weight Distribution System for a 3,800 lbs Camper
- Shop: Trailer Wiring
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Search Results: curt 17062
- Search Results: sway control
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: Is Weight Distribution Hitch Or Sway Control Needed For 2019 Toyota 4Runner TRD Pulling RV?
- Q&A: Adding Additional Sway Control To a Reese Pro Round Bar Weight Distribution
- Q&A: Will Friction Sway Control Stop Swaying Trailer that Already has Weight Distribution
- Q&A: Reese Weight Distribution System Recommendation for 1,050 lbs of Tongue Weight
- Q&A: Can Friction Sway Control Be Added To Small Travel Trailer Without Weight Distribution Hitch?
- Q&A: Locating Jumper Plug for 7-Way Installation in 2008 Nissan Pathfinder
- Shop: Suspension Enhancement
- Shop: Stealth Hitches Hidden Rack Receiver - Custom Fit - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Feature Breakdown: Curt Round Bar Weight Distribution System w/ Friction Sway Control
- Video: All About the Curt MV Weight Distribution System
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 5,000 lbs
- Shop: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 3,500 lbs
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Search Results: reese steadi~flex
- Video: How to Choose a Trailer Brake Controller
- Article: Trailer Wiring Diagrams
- Video: Clean Up Your Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
on Weight Distribution Hitch
