Customers compare C17063 to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Curt MV Weight Distribution System with Friction Sway Control. We're gonna go over some of the features of this system and kind of compare it to some of the other weight distribution systems that we have available here at etrailer.com. So if you're not familiar with what a weight distribution system is … see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hi there Jaime; thanks for the question and you are right on the money for the Reese weight distribution hitch that will work with your Coleman 17B: - Reese Pro Round Bar Weight Distribution #RE34FR This is rated for tongue weights between 200 lbs…
view full answer...Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…
view full answer...The brake controller installation on your 2006 F150 is pretty easy. The connector for the brake controller is located under the dash, behind and to the right of the OBD port as shown in the video I've linked for you. You'll need the brake…
view full answer...You will be able to back up with the Reese Pro Round Bar Weight Distribution item #RE34FR set up. It may be a lot easier to remove the springbars from the weight distribution system first but it isn't necessary. You won't have any issues with…
view full answer...That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…
view full answer...When in doubt, go with your gut. In this case your gut is 100% correct - you'll have a nice cushion in margin when it comes to maxing out your 2019 Dodge Durango, but you'll want a weight distribution system to help level out your towing rig…
view full answer...Thanks for the pictures! I ran those by some veteran guys at the office and we're drawing a blank on I.D.ing that system. However weight distribution heads and parts are all brand and model specific so there's no way to 100% get the correct…
view full answer...Yes, a 1,000 lb tongue weight weight distribution system will work great on a Forest River Wildwood 26DBUD with a dry tongue weight of 795 lbs. That said, if you wanted some more room for error or the ability to upgrade trailers down the line you…
view full answer...What you need for your boat trailer is a pole tongue adapter like part #RP58393. This product is designed to work on trailers with straight tongues just like your boat trailer. I attached a picture of what it looks like installed. The best way to…
view full answer...I do have a recommendation for you to check out, plus I have attached a link to our selection of Weight Distribution (WD) systems that meet the criteria that you specified. As far as ground clearance goes it really just depends on your towing setup.…
view full answer...The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…
view full answer...I do have a solution for you, however since we do not carry any Carefree products your best option is replace both arms with the: -Solera Universal Awning Support Arms for RVs #LC434727. These awning arms will work with Dometic, Carefree, or Solera…
view full answer...