Replacement Hubs for Aluma 8610T Snowmobile Trailer.
Updated 02/03/2020 | Published 02/02/2020
Products Featured in This Question
Question:
I need new hub assembly for an Aluma 8610t snowmobile trailer. Will you part#AKIHUB-545-2-IK work?
asked by: David P
Expert Reply:
It looks like the Aluma 8610t snowmobile trailer has 12" wheels with a 5 on 4-1/2 bolt pattern, so that will help us get to the correct replacement hubs. But we will also need to determine the bearings on your current hub, which you'll have to remove the hubs and pull the bearings to find this information. Your bearings, races and grease seal will most likely have numbers stamped on the backs of them to help identify them, but if there are no stamps present you'll need to measure them using a digital calipers.
The AKIHUB-545-2-1K uses # L44643 inner and outer bearings, # L44610 races and the # 34823 grease seal. If your existing hubs use those components you can use the # AKIHUB-545-2-1K as a replacement hub.
I've linked two of our help articles on how to find the correct replacement bearings and the measurements of the most common sizes. If you can provide me with which components your hubs use, I can verify if you'll be able to use the # AKIHUB-545-2-1K or whether you need a different hub for your trailer.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: license plate light
- Search Results: ladder
- Search Results: wheel chocks
- Shop: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2-1/2" Hitch - 2" Drop - 10,000 lbs
- Shop: etrailer Ball Mount w/ Pre-Torqued 2-5/16" Ball - 2-1/2" Hitch - 2" Drop - 20,000 lbs
- Video: A Closer Look at the P&F Access Ladder for Enclosed Trailers
- Shop: Brake Controller
- Video: A Closer Look at the Ultimate Trailer Jack
- Video: Comprehensive Review: Ultimate Trailer Jack
- Shop: Redarc Tow-Pro Link Bluetooth Brake Controller - Off-Road Mode - 4 Axles - Proportional
- Shop: Peterson Snap-In License Plate Light - Submersible - Round - Chrome Plated - Clear Lens
- Shop: Optronics Snap-In Mini License Plate Light - Incandescent - Round - Chrome Plated - Clear Lens
- Shop: Access Ladder for Enclosed Trailers - 7' Tall - Aluminum - Silver
- Shop: Telesteps Telescopic A-Frame Ladder - Aluminum - 6' Extended Height - 375 lbs
- Q&A: Lug Nut Torque for Aluminum Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer jack
on Trailer Hubs and Drums
