Best Trailer Hitch Receiver for 2020 Buick Enclave

Question

Question:

What is the best trailer hitch receiver you think for my 2020 Buick Enclave?

asked by: Justin E

0

Expert Reply:

The best trailer hitch receiver for your 2020 Buick Enclave is the Curt Trailer Hitch Receiver # CU29FR because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. This Class III, 2" trailer hitch is entirely hidden behind your bumper when not in use.

This hitch is rated for use with a weight distribution system, which is important for those that use a WDS to stay level or control sway.

I have added a link to a video of the Curt Trailer Hitch Receiver # CU29FR being installed on a Buick Enclave for you to check out as well. To add a trailer wiring harness to power your trailer lights you will also need T-One Vehicle Wiring Harness # 118761.

expert reply by: Kyle S

0

click to enlarge

Answer 1

For your 2021 Buick Enclave the trailer hitch I recommend is the Curt Class III part #CU29FR which can be hidden when not in use and also has great towing capacities. I attached an install video for you to check out. Then for 4-way trailer wiring…

view full answer...

Answer 2

For your 2020 Chevrolet Traverse I recommend the Curt Trailer Hitch Receiver #CU29FR. I really like the design of this hitch. There's a trap door on the bottom of the bumper where the receiver tube will sit, and it can be put back when the hitch…

view full answer...

Answer 3

Hey Jay! For a gooseneck hitch you need the B&W Turnoverball #BW94UR. I'm not entirely sure what you have in mind for towing, but you can use this as a standard gooseneck or add the Companion 5th wheel hitch to tow your 5th wheel. If…

view full answer...

Answer 4

Hey Eric, yes the Curt hitch part #C37RV does fit the PHEV versions of the 2026 Kia Sorento like you have so it would work great. I attached a picture of a review from a customer that installed it on a PHEV for you to check out as well. Are you…

view full answer...

Answer 5

A hitch and trailer wiring can certainly be installed on a 2021 Chevrolet Traverse. The etrailer Trailer Hitch Receiver #e56YR would be a great choice; this is confirmed to fit all models of the 2021 Traverse. It has a max towing capacity of 5000lbs,…

view full answer...

Answer 6

Hey it sounds like you are on the right track here, Blake. The Kodiak Disc Brake Caliper #KDBC225DAC is exactly what we recommend for replacing the Tie Down 46304 calipers. We have confirmed on multiple occasions that the Kodiak caliper is a suitable…

view full answer...

Answer 7

Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Best Trailer Hitch Receiver for 2020 Buick Enclave

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching