Which is Better GM Tow Package or Curt Tow Package for 2019 Chevy Traverse

Question

Question:

wHAT IS INCLUDED WITH THAT PACKAGE . iS IT WIRED WITH A PLUG FOR THE TRAILER ? WHAT CLASS HITCH AND WHAT DO i NEED TO PURCHASE TO START TOWING?

asked by: Richard F

0

Expert Reply:

I looked up what the GM trailer towing package includes for your 2019 Chevy Traverse and it gives you a hitch that installs through the rear bumper panel of the vehicle (just like our Curt part # CU29FR), and a 7-way trailer wiring connector just like our # 118287 at a much better price as I was able to compare the prices too! In my opinion it makes more sense to go with the towing products we offer as it's the (if not better), quality a much better price.

I attached a picture of what our hitch and wiring will look like when installed on a Traverse just like yours. The bumper cover can go back over the hitch and wiring when not in use too which is nice.

If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

expert reply by: Jameson C

0

Michael S.

5/29/2020

Bought a new 2019 Traverse. When I asked the salesman what the towing capacity without the OEM package he replied 3500. That works for me. However, later found out that the towing capacity is 1500# without package. Bad on me for not doing homework. If I install your hitch, wiring harness and transmission cooler would it be advisable to tow up to 3500#?

Chris R.

6/2/2020

Unfortunately the towing capacity for your Traverse will always be 1,500 pounds in the eyes of GM. You can add aftermarket components like a higher-rated hitch and transmission cooler to help it better support this weight, but you'll always be limited by that number. In reality you may be increasing the capacity by adding those components - but if anything were to happen it wouldn't be covered under warranty since you're technically exceeding the factory limits of the truck. I know this isn't the best news to hear.

Answer 1

The etrailer #e56YR and Curt #CU29FR, are very similar. The capacity and installation process is the same. However, one of these stands apart from the others. If I had to recommend one for your 2023 Traverse it would be the etrailer #e56YR. The…

view full answer...

Answer 2

The best trailer hitch option we have for your 2020 Chevy Traverse for carrying a cargo carrier and a bike rack is the Curt #CU29FR as it's mostly hidden as it fits behind the rear bumper fascia panel, has plenty of weight capacity, and is made…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Which is Better GM Tow Package or Curt Tow Package for 2019 Chevy Traverse

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching