Location of Connector for Remote Pendant PD92201 on Progressive Dynamics PD9245C RV Converter

Question

Question:

Where is the accessory port for the pendant located on the converter? Thank You, John

asked by: John C

0

Expert Reply:

The port that the # PD92201 remote pendant plugs into is located on the side of the # PD9245C unit as shown in the provided photo.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Progressive Dynamics Inteli-Power RV Converter and Battery Charger - Lithium - 24V - 40 Amps #PD914024ALV will fully charge your battery bank but it doesn't have different stages of charging. Unfortunately there aren't any other options…

view full answer...

Answer 2

In regards to the Progressive Dynamics Inteli-Power RV Converter and Battery Charger part #PD9160ALV, there will be no issues using this on a lithium (LiFePO4) battery with integrated BMS. The BMS is just there for protection but since the converter…

view full answer...

Answer 3

Once you flip the switch to lithium on your Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K it basically bypasses the Charge Wizard #PD92201 so you can remove it or leave it connected.

view full answer...

Answer 4

Hey Gary, thanks for the information. Since you've upgraded to LiFePO4 batteries, I recommend upgrading your converter to the Progressive Dynamics 9300 Series RV Converter Charger item #PD79RR. This delivers 60 amps of DC charging power at 14.6…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Location of Connector for Remote Pendant PD92201 on Progressive Dynamics PD9245C RV Converter

Product Page this Question was Asked From

Continue Researching