bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Accessories and Parts Help Hub
  4. Accessories and Parts Q&As
  5. Question 387168
Q & A Icon

Lid Supports that Fit Yakima Skybox Carbonite 16  

Published 10/14/2019

Question:

Ok, thanks. I think I will be ordering new hinges for front and back of my Carbonite Skybox 16 but I would like to know if I can order the newer hinge style with the single arm that eliminates the buckling problem of the two arm style. Please let me know which ones I should be ordering.

0

Expert Reply:

Is this the latch you are looking for?

8870090

Replacement parts for your box aren't all available but I believe this might be what you are looking for.

expert reply by:
0
Jameson C
Mike L. profile picture

Mike L.

10/14/2019

Ok, thanks. I think I will be ordering new hinges for front and back of my Carbonite Skybox 16 but I would like to know if I can order the newer hinge style with the single arm that eliminates the buckling problem of the two arm style. Please let me know which ones I should be ordering.

Jameson C. profile picture

Jameson C.

10/14/2019

The lid supports for the Carbonite box you have are the part # 8880683 which is the single arm style you are wanting.
Ask The Experts a Question >>

Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for 8880683
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Accessories and Parts

Videos

Help Articles

Expert Answers

Others Also Watched
Comprehensive Review: Replacement Lid Support for Yakima Cargo Boxes
Checking Out the Crossbar Clamps for Yakima LockNLoad Platform Rack
Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
How to Choose a Trailer Brake Controller
An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Measuring To Choose The Right Trailer Axle
What to Know About the Curt TriFlex NEXT Trailer Brake Controller
Redarc Tow-Pro Liberty Brake Controller Review RED24FR
Clean Up Your Trailer Wiring
B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
Others Also Read
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Measure Your Trailer Wheel Bolt Pattern
5 Things to Know About Weight Distribution Hitches
How to Choose the Right Trailer Hitch Class
Trailer Lighting Requirements
Brake Controller Installation: Starting from Scratch
4 Steps to Choosing Your 5th Wheel Pin Box
The 5 Best Trailer Drop Hitches You Can Buy
30-Amp and 50-Amp RV Service: What's the Difference?
Others Also Asked
Replacement Lid Supports for the Yakima Skybox 21

The Yakima Skybox 21 part #Y07337 made from 2014 to present has a much more aerodynamic shaped lid than the Yakima Skybox 21 part Y07184 made from 2009 to 2014 had. I have attached a photo of each so you can see the difference. If you have the 09-14…

view full answer...
Replacement Lid Supports for Yakima Skybox 16

I checked with Yakima and for your Skybox 16 the correct lid support for the rear is supposed to be part #8870072 and for the front is part #8870090. The picture you submitted shows a broken or twisted part #8870090 so that is what you'd need as…

view full answer...
Replacement Parts For Yakima BlackTop Pro Roof Top Cargo Carrier

It does appear you have a Yakima BlackTop Pro cargo carrier. Unfortunately the only replacement part still manufactured for your box is the Replacement Mounting Clamp #Y62XR. You may be able to locate some of the lid supports in good used condition…

view full answer...
How Many Replacement Mounting Clamps For Yakima SkyBox With No Mounting Clamps

Hi Dan, that is correct. Since you don't have any of the clamps and the #Y62XR is an individual clamp you will need a quantity of four.

view full answer...
Replacement Lid Support for Yakima Roof Cargo Box

Thanks for the picture of your Yakima box's lid support. Based on that I can tell you that the part #8880683 is the correct replacement you are looking for.

view full answer...
Where Do Strip Seals Install at on Yakima SkyBox Series Rooftop Cargo Boxes

The Replacement Seal Strips for Yakima SkyBox Series Rooftop Cargo Boxes part #8870086 isn't an upgrade, it's just a factory replacement for the seals that come with the box from the factory. These install inside the box, on the bottom under…

view full answer...
Replacement Mounting Clamp For A Yakima SkyBox

For your Yakima SkyBox, you are going to need the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes #Y62XR. This replacement clamp will work on all Yakima SkyBoxes, so if that's what you have this'll work fine. If this is not what you…

view full answer...
Replacement Parts for Old Yakima SkyBox Pro 16

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

view full answer...
Replacement Lid Support for a Yakima SkyBox 16

It sounds like you are needing the lid supports for your Yakima SkyBox 16, part #Y07335. We have that here. It's part #8880683. These may look a bit different than what you are used to, but that is because Yakima has updated their supports. This…

view full answer...
Replacement Parts for Yakima SkyBox 16s Rooftop Cargo Box 8007178

Yes, the Replacement SuperLatch Handle Assemblies part #Y8880348 will be a direct replacement for your Yakima SkyBox 16s Rooftop Cargo Box 8007178. It is the exact same assembly that you have attached a photo of. I have attached a list of other…

view full answer...
What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...
Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...