Replacement SpeedKnob for the Yakima Dr.Tray Bike Rack

Question

Question:

Is this the correct replacement part for the Dr Tray?

asked by: Mindy L

0

Expert Reply:

The correct replacement SpeedKnob for the Yakima Dr.Tray 2 Bike Platform Rack is actually the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks part # 8880717 which is slightly longer than the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks part # 8880508.

expert reply by: Conner L

0

Answer 1

Hello Cody, For you Dr Tray bike rack that has a 2" receiver, you will need the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks #8880508. The Dr Tray is not listed because the rack is no longer made, but we have confirmed with…

view full answer...

Answer 2

Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item #8880717 fits a mixture of 2" and 1-1/4" Dr Tray bike racks.

view full answer...

Answer 3

You have a Yakima Dr. Tray Bike Rack for 2 Bikes that uses a 2" Receiver. The Yakima part number is 8002473 as we no longer carry this rack. The first 5 numbers are associated with your product part number. The other parts of the number identify…

view full answer...

Answer 4

Since you do not know your lock core/key number, the best option is going to be to replace the entire lock core with the Replacement Lock Core and Keys for Yakima Rack and Roll Trailer #8880553 (S307) or #8880551 (S305). As long as your lock is…

view full answer...

Answer 5

I spoke with Yakima about removing the SpeedKnob on the Yakima RidgeBack Bike Rack and she stated that you need to just use more force since the threads are likely stripped. The other option which would not require excessive force would be to take…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement SpeedKnob for the Yakima Dr.Tray Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching