Recommended 7-Way Wiring on 2019 Kia Sorento for Travel Trailer Connection

Question

Question:

I just purchased a 2019 Kia Sorento and need to hook up to a 7 pin plug on a travel trailer so that it will power the 12v circuits on the RV and recharge the RV battery as well as just operate the rear lights. What do you recommend?

asked by: John C

0

Expert Reply:

If your 2019 Kia Sorento has the factory tow package then I recommend starting with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56332 which will connect to the wiring harness located along the frame rail at the rear of your vehicle. If you don't have the factory tow package then I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118583 which connects behind your tail lights and draws power directly from your vehicle battery.

Once you have a 4-way in place, then you can use the # ETBC7L to get that 12V power and the 7-way trailer connector. I've attached an article to assist. If the trailer has electric brakes, then you may also be interested in the Curt Echo Wireless brake controller # C51180 which would require no further wiring. If you are interested in another brake controller then you would instead use # ETBC7 to hardwire that controller as well. My favorite is the RedArc Tow-Pro Elite # RED44FR because it installs cleanly to your dash to give a factory look. The quality and function of this controller is equal with the best in the industry. It will be a great addition if you will be towing a trailer with brakes.

expert reply by: Jason S

0

click to enlarge

Answer 1

I recommend using a 4-way harness part #C56332 to then add a 7-way and 4-way converter part #ETBC7. Once you have the 4-way harness hooked up, then you can convert it to a 7-way and 4-way. This is a straightforward install and I have attached a…

view full answer...

Answer 2

For the wiring your 2019 Kia Sorento 3.3 L V6 FWD I always recommend doing it all at the same time. The Vehicle Wiring Harness with 4-Pole Flat #C56256 plugs into your taillights but will require a constant power source be ran to the battery. It…

view full answer...

Answer 3

In order to install a 5-Way connector on your 2019 Kia Sorento you will need to start with a 4-Way harness if you don't already have one. For this the Curt T-Connector #C56332 will work perfectly if the Sorento is equipped with the factory tow…

view full answer...

Answer 4

Your 2019 Kia Sorento is rated for 2,000 lbs and 200 lb tongue weight if you have the 2.4L 4-cylinder engine and 1-1/4 inch trailer hitch receiver. If you have the 3.3L V6 then if you have the 3,500 lb towing capacity with 350 lb tongue weight if you…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

Hello Joe, Since your 2005 Ford F-150 already has the 4 flat wiring, you will need to build on top of that by installing the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires #ETBC7. To install the…

view full answer...

Answer 10

No, I do not Paul and I doubt Curt or Draw-Tite make anything other than a 4-way for the hybrid model. Aftermarket wiring harnesses for vans are typically limited to 4-way connectors like the item #C63RV for LED lights or the item #C32MJ for…

view full answer...

Answer 11

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 12

Since your 2019 Kia Sorento is brand new you probably have the window sticker still. On the window sticker it will be listed whether you have the tow package or not. Or you can contact a Kia dealer and give them your VIN and they'll be able to…

view full answer...