Do Curt and Draw Tite Trailer Hitches for 2017 Buick Envision Fit with Dual Exhaust

Question

Question:

The videos show installation of the hitches in a 2.5 litre engine envision but mine has the 2.0 turbo with dual exhausts. Would both the Curt and the Drawtite hitch work????

asked by: Shawn S

1

Helpful Expert Reply:

We checked with Curt and Draw Tite and both hitches fit with single or dual exhaust so the part # C13405 or the Draw Tite # 76080 would fit and work great. I attached the install video links as well as attached a picture that shows what the hitch looks like installed which shows how the hitch fits relative to the exhaust.

I'd go with the Draw Tite over the Curt as it has higher capacities and will be a bit less visible once installed.

expert reply by: Jameson C

1

click to enlarge

Answer 1

We do have easy to install trailer wiring for your 2020 Buick Envision with the Tekonsha kit part #118725 which plugs in easily to a connector at the rear of your vehicle and comes with the needed relays to activate the trailer wiring but the Draw…

view full answer...

Answer 2

It is absolutely safe to tow with a panoramic roof on you your 2018 Buick Envision with a panoramic roof; I also checked the owner's manual just to be thorough and there was nothing about the roof, so can tow with this vehicle without worry about…

view full answer...

Answer 3

For your 2018 Chevy Equinox the trailer wiring kit you would want is the Curt part #C56375 based on what you described your vehicle having. If you have the connector available that this plugs into and the spots for the included relays this would be…

view full answer...

Answer 4

You can reinstall the lower rear bumper cover of your 2017 Buick Envision after the install the Curt trailer hitch part #C13292 you referenced. If you check out the 20 second mark of the install video I attached you can see our installer removing the…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13405 for your 2019 Buick Envision is a nice fit. I've attached a photo like you requested to assist that was in the attached Installation instructions to help. This hitch…

view full answer...

Answer 6

If your bike rack blocks your rear view camera you'd have to turn around and look behind you plus use the mirrors as you back up. Back up cameras aren't legally required on vehicles at this point so having them blocked wouldn't get you…

view full answer...

Answer 7

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76300 is a confirmed fit for a 2019 Buick Envision with either 2.5L or 2.0L Turbo. It features a bolt-on install with no drilling required. The 2" receiver is great for towing or other hitch…

view full answer...

Answer 8

We do have a trailer hitch that fits your 2019 Buick Envision and the best one is the Curt Trailer Hitch #C13405 because of how well hidden it is under your vehicle and because it is a total bolt-on installation which does not require any drilling…

view full answer...

Answer 9

I'd be more than happy to make some recommendations for towing with your 2020 Buick Envision! Here is a list of parts for you: - etrailer Trailer Hitch Receiver #e86KR - Wiring Kit #C56364 (if you have a factory connector) OR part #C59236 (if you…

view full answer...

Do Curt and Draw Tite Trailer Hitches for 2017 Buick Envision Fit with Dual Exhaust

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching