Height of Buyers Products A-Frame Jack # 3370091265 without Handle
Updated 04/29/2019 | Published 04/26/2019
Question:
I have a trailer tool box mounted near the area of the jack. I need the measurement of the jack from the mounting plate to the top of the tube. Please do not include the height of the handle. The handle needs to be above the tool box in order to properly function the jack. My old broken jack had 12 3/4inch which is the minimum measurement i can accept.
asked by: Drew H
Expert Reply:
I went out to our warehouse to take a look at the Buyers Products A-Frame Jack # 3370091265 referenced in your question. I measured a height from the mounting bracket up to the top of the tube (before the handle) of just about 9-1/2 inches. I have attached an image to assist.
To get the clearance measurement you're needing you likely will need to move down to a 2,000 pound topwind jack (if possible for your trailer's tongue weight). For this I recommend taking a look at the Pro Series # PS1401000303 that features a height of 16 inches from the bracket to the top of the jack (before the handle). This jack has 15 inches of lift and can be paired with the Detachable Footplate # PS1400700340.
I have included a short video demonstration that you can check out as well.
Product Page this Question was Asked From
Buyers Products A-Frame Jack w/ Support Foot - 15" Lift - 5,000 lbs
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- 4001 - 5000 lbs
- Manual Jack
- 15 Inch Lift
- Bolt-On
- With Rectangle Foot
- Buyers Products
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs - Black
- Search Results: trailer hitch pin
- Shop: Buyers Products A-Frame Jack w/ Support Foot - 15" Lift - 5,000 lbs
- Video: All About the etrailer Round Topwind A-Frame Trailer Jack
- Shop: Dutton-Lainson A-Frame Trailer Jack - Topwind - 14" Lift - 5,000 lbs
- Video: A-Frame Trailer Jack: The Breakdown
- Shop: Square A-Frame Trailer Jack w/ Footplate - Drop Leg - Sidewind - 15-1/4" Lift - 3,000 lbs
- Video: Review of the Buyers Products A-Frame Jack w/ Support Foot
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Lift - 3,000 lbs - Black
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 15-1/2" Lift - 2,000 lbs
- Q&A: Manual A-frame Jack Replacement for Lippert Electric Trailer Jack
- Shop: Adco Designer Tyre Gard RV Tire Covers for 30" to 32" Tires - Single Axle - Tan - Qty 4
- Video: A Closer Look at the Dutton-Lainson A-Frame Topwind Trailer Jack
- Video: Feature Review Replacement Jack Foot for Dutton-Lainson 5,000-lb Trailer Jacks
- Q&A: Is Lippert Jack Foot Plate LC165253 Compatible with Dutton-Lainson 5K Topwind Jack DL22772
- Q&A: Availability of 5,000 lb Top Wind Trailer Jack with Grease Zerk Fitting
- Q&A: Can Dutton-Lainson A-Frame Trailer Jack Use Drop Leg
- Q&A: Trailer Jacks Manufactured in the USA
- Video: A Closer Look at the Buyers Products A-Frame Jack w/ Support Foot
- Q&A: Mounting Bolt Hole Pattern for the Buyers Products A-Frame Jack # 3370091265
- Q&A: Recommended Tongue Jack for 10,000 lb Car Hauler Trailer
- Search Results: trailer jack
- Search Results: trailer valet
- Search Results: bd155033
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Camper Jacks
