Result: bulldog trailer jack

To replace your Iota IDP-240 you'll want to use the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8. This panel is rated for 50 amp service, can provide both 120v/240v and is compatible with…

The Keystone Montana is unique in that it has its own set of landing gear legs with three weld stops (tabs) instead of two, and the only option we offer for that is a set of replacement legs: - Replacement Lead Leg for Keystone Montana 5th Wheel…

The Demco A-Frame Trailer Coupler part #DM14793-97 is designed for a standard a-frame trailer with a 50 degree angle. This is the most common type so there really shouldn't be any other issues that affect fit. That said, I have attached some…

Yes, the Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs #322-RDJ-2K you were looking at can be removed from the mounting bracket by removing the keeper pointed out in the included diagram, and then removing the foot. After…

The part number you gave is no longer a valid number for Bulldog jacks. It sounds like you are looking for the Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 15" Lift - 5,000 lbs #BD190754. This has a 5,000 lb lift capacity and an…

The Gorilla-Lift Utility Trailer Tailgate Lift Assist part #GL1 is designed for tailgates no more than 300 lbs. There is not an option to upgrade the weight capacity nor is there a lift assist for a heavier tailgate. This would be he limit for a…

I spoke to a representative with Demco about your Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball - Single Jaw - 21,000 lbs, part #DM8550046. and he gave me some things for you to check. The first thing he suggested is to…

I went ahead and linked the video you are referencing about rebuilding a square jack like the Square Direct Weld Jack #TJD-12000SP-F2 from our website to this answer. We have a number of replacement parts in that video and some that were not included…

The fit would really depend on the tires and bolt pattern you currently have, and I wouldn't have any idea of what you've currently got - for reference these wheels are 15" in diameter, 6" wide, and uses a 6 on 5 1/2" bolt…

The replacement parts we have for the Bulldog Square Jack #BD182500 are a Replacement Gear Kit #BD500212 and a Replacement Screw and Nut Kit #BD500217. These are the two most likely aspects of the jack to be causing your problem. I have attached the…

I'm assuming you have a tandem axle trailer and therefore 4 wheels. The highest rated tires we carry for 15 inch rims is load range E with a capacity of 2,830 pounds. Multiplied by 4 that's 11,320 pounds which is a good amount for your 12,000…

The Dexstar Steel Spoke Trailer Wheel #AM20750 has a weight capacity of 3,750 pounds. You will need The Vesper Steel Modular Trailer Wheel #MX27FR. This rim has a weight capacity of 4,460 pounds. This rim has an imporved torque retention technology…