Distance from Mounting Bracket to Bottom of Buyers Products Jack 3370091265

Question

Question:

Can you please tell me the distance from the bottom side of the 3 bolt mounting flange to the bottom of the fixed outer tube, also can you tell me the distance from the bottom side of the 3 bolt mounting flange to bottom side of the foot when fully retracted? Thank you

asked by: Frank S

0

Expert Reply:

I checked with Buyers Products and they informed me that for the # 3370091265 the fully retracted height to the bottom of the mounting bracket is 7.849”, this increases to 9.958” when the “foot plate” is attached.

expert reply by: Jameson C

0

Answer 1

Good news, I can help you find an A-frame jack that has a lower retracted height than 8 inches. One of the lowest retracted height A frame jacks I was able to find is our part #TJA-2001-B. This jack has a retracted height of 5-1/8 inches. I was also…

view full answer...

Answer 2

I went out to our warehouse to take a look at the Buyers Products A-Frame Jack #3370091265 referenced in your question. I measured a height from the mounting bracket up to the top of the tube (before the handle) of just about 9-1/2 inches. I have…

view full answer...

Answer 3

The 2045830 number you have comes back to the Trimark 060-0400, which I can find some dimensions on but could not find the cutout hole requirements so I recommend removing the backing plate of your latch and measuring the cutout hole and door…

view full answer...

Answer 4

Hey Lloyd, there isn't a wheel option made for the etrailer Sidewind Trailer Jack w/ Drill Adapter #e88GV but we do have an a-frame jack that does have a wheel caster like you are looking for with the Dutton Lainson part #DL74MR. This will work…

view full answer...

Answer 5

Hi Robert, Based on the bolt pattern dimensions you provided, the etrailer Self-Contained Hydraulic A-Frame Trailer Jack #e43QV is going to be your best bolt-on replacement option. The mounting pattern on this jack uses the standard A-frame…

view full answer...

Answer 6

The mounting bolt pattern of the Buyers Products A-Frame Jack #3370091265 is 3" all the way around. The mounting holes are elongated though so if you have a slightly larger/smaller distance it should still work out.

view full answer...

Answer 7

If your Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 4,500 lbs, part #HT87247, has brakes that are no longer engaging and the jack no longer holds under load, it is time to replace your jack. The Stromberg Carlson Electric…

view full answer...

Answer 8

There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options:…

view full answer...

Answer 9

Hello Dave, You’re right about how it works. When installing the Smart LED Light Strip w/ App and Wireless IR Remote Control #DIA86QR the Diamond Group DG72694 controller can run two LED strips at the same time. It has two plugs with four pins each…

view full answer...

Distance from Mounting Bracket to Bottom of Buyers Products Jack 3370091265

Product Page this Question was Asked From

Continue Researching