How to Lock the Kuat Hi-Lo 2 Hitch Extender to a Vehicle

Question

Question:

Will the anti-rattle locking hitch pin for a Kuat Transfer rack fit the receiver end of a Kuat HiLo hitch extension?

asked by: Ken

0

Expert Reply:

Yes, the shank on your Kuat Transfer 2 Bike Platform Rack will work on the receiver tube opening of the Kuat Hi-Lo 2" Hitch Extender part # HL20B. For a lock, you can use the Anti-Rattle Hitch Lock for Kuat Transfer and NV Core Bike Racks part # HLT.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 5

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 6

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

It sure is Rob, and congrats on the new SUV. The Oris Trailer Hitch with Detachable Hitch Receiver item #TS76VR is definitely comparable to the Stealth Hitches item #SH87FR. It's got the same kind of removable receiver that works great with a…

view full answer...

Answer 9

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 10

No, it will not Bryan. The Redarc Tow-Pro Link item #RED57AR requires a USCAR port that comes with factory tow packages. The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #SH25VR, that fits your 2023 BMW X5, does not have this…

view full answer...

Answer 11

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Answer 12

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

How to Lock the Kuat Hi-Lo 2 Hitch Extender to a Vehicle

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching