Result: 5th wheel landing gear

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…

Hey Travis, thanks for reaching out! Yes, on landing gear where both legs have a motor they will both be considered as lead legs, like the Stromberg-Carlson #LG-179013 you're looking at. If you can let me know what landing gear you have I can…

The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…

The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…

The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs #LG-4 will work well with your trailer. I've attached a photo that shows where the weld stops are for the brackets mounted on your trailer. You…

Aside from the weight capacity of the jacks and their speed, they also have different mounting bracket locations. If you don't mind potentially having someone do some cutting and welding on your trailer then either one will work great for you. If…

The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…

I reached out to my contact at Lippert and they said that it sounds like you just aren't holding the 4 buttons for the reset long enough. It requires 5 seconds, but many people will count to 5 a little too fast and the system won't reset. He…

In order to determine if the issue you are having with your landing gear legs clicking and popping is caused by the gear box or leg assembly you will simply need to disconnect the gear box from the legs and then test each manually. If you feel…

The Lippert Components 29-1/2-Inch Lead 5th Wheel RV Landing Gear Drop Leg #LC179013 and the Stromberg Carlson Replacement Lead Jack with Drop Leg #LG-179013 are virtually identical. If one fits your landing gear the other will too. Lippert…

Atwood was bought out by Dometic and Lippert. Lippert took their chassis components such as jacks, couplers, etc. and Dometic took their interior stuff like ranges, ACs, etc. Lippert is basically completely dissolving the Atwood brand on there side…