Stromberg Carlson Landing Gear Replacement for 2001 Fleetwood Prowler LSI 30 5G

Question

Question:

I was curious if the LG-4 would fit my trailer

asked by: Eric L

0

Expert Reply:

The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs # LG-4 will work well with your trailer. I've attached a photo that shows where the weld stops are for the brackets mounted on your trailer. You shouldn't need to change out the brackets so these should bolt right up and work well for you.

expert reply by: Jason S

0

click to enlarge

Answer 1

We can get you un-stranded! The correct follow leg for your landing gear is going to depend on how long it is. If your leg measures 29-1/2" (see attached photo), you would need replacement #LG-179014, which can be used with most landing gear…

view full answer...

Answer 2

If there isn't a brand name printed on a tag somewhere on the actual landing gear it is not easy to determine because they all look and function the same way. The nice part about that is that if you need to replace parts or complete systems they…

view full answer...

Answer 3

I do have a couple of solutions for you that will work for your 2004 Jayco Eagle fifth wheel. Upon first glance, it appears that your landing gear might have been made by Venture, which is not one of our vendors, but we sell other systems that will…

view full answer...

Answer 4

For your 2018 Jayco 5th wheel 29bhds, determining the weld stop locations will help you determine the correct replacement lead leg for your trailer. For instance the typical weld stops are 17-1/2 inches from outside to outside like you find in the…

view full answer...

Answer 5

Hi James; the better option would be the Bulldog #BD500162 you were looking at. You can add the Motor and Switch Kit for Stromberg Carlson Landing Gear #LG-217884 to the Bulldog which will give it the same functionality as the #LG-4 while saving you…

view full answer...

Answer 6

For your 2010 Open Range 5th-Wheel Trailer, I recommend looking at the Stromberg Carlson Electric Landing Gear Set #LG-4. Each leg on this set is 33-1/2 inches tall and provides up to 19-7/8 inches of travel. It has a combined weight capacity of…

view full answer...

Answer 7

Although you did not mention if it is the lead or follow leg that is not working, if it is the follow leg it may be that you have an issue with the gearbox and would need to replace it with Replacement Aluminum Gearbox #LG-179015 which will work with…

view full answer...

Answer 8

In case you want to just service your existing Venture VMC940 5th wheel landing gear driver leg you can use gearbox #LG-179015. For a complete replacement lead jack use Replacement Lead Jack with Drop Leg #LG-179013 which is a universal fit that…

view full answer...

Answer 9

When you install your Reese Electric 5th Wheel Landing Gear Set #RP500708 you will want the brackets to either be on the outsides of the weld stops or the insides of your weld stops. This will keep your landing gear in place when it is moving up and…

view full answer...

Answer 10

The most important metric for selecting new landing gear legs for a 5th wheel trailer is the overall length of the outer tube. The two most common measurements are 29-1/2" and 33-1/2". If you select the correct replacement based on the…

view full answer...

Answer 11

I have attached a photo for you that shows how to properly measure the outer tube on a landing gear leg. I have not heard of a landing gear leg with a 36-1/2" long outer tube so if this is what you have then I recommend you replace both the lead…

view full answer...

Answer 12

The weld stops on the Lippert Electric Landing Gear Set #LC333964 referenced in your question are not designed to be moved, but I can give you a couple dimensions to see if they will match up to the existing brackets on your trailer. The weld stops…

view full answer...

Stromberg Carlson Landing Gear Replacement for 2001 Fleetwood Prowler LSI 30 5G

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching