Sleek RV kitchen faucet has plastic compression valve stems that help prevent leaks so you won't have to worry about wasted water. Deck plate and mounting hardware are included to make it easy to replace your existing faucet.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix faucets chrome finish 8 inch dual handle RV kitchen faucet. This is a chrome plastic construction. Has the dura-pro under-body, does use the plastic compression valves. Also uses, you can see the dual clear acrylic knobs for controlling your hot and cold water. The flow rate on this faucet is 2.2 gallons per minute. Does use a 2 hole mount as you can see right here.
The 2 threaded connectors that connect to your hot and cold water. The measurement, the distance between those connectors center to center is going to be right at 8 inches. Basically to install this, you'll remove these plastic lock nuts that are on each connector here, drop these into the holes in your sink or your counter and then secure it by tightening these plastic lock nuts on to it. I do want to give you a few measurements on this. The spout length. You can see it has a rotating spout. The spout length which will be measured from here right to here is going to be right at 8 inches for the spout length.
The overall width from this edge to this edge is going to be right at 10 and a quarter inches. The height when this is installed from the bottom of the base to the very tallest point, if we rotate it that way, you can see if we do height is going to be right at 6 and a half inches. The shank length which is the measurement of these threaded water connectors from the bottom of the base to the very end. Those are going to measure right at 2 inches for the shank length and then the depth which when this is installed if you have this spout all the way straight out to here to here, you're going to be looking at right at 10 and a half inches for the depth. This faucet does come with a nice set of detailed instructions that will show you how to install it and on the very back it will list all the parts that are included in this part number. That should do it for the review on the Phoenix faucets chrome finish 8 inch dual handle RV kitchen faucet.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.