Troubleshooting Lippert Ground Control with Front Jack that Doesn't Stop During Auto Retract

Published 08/08/2018

Question:

When auto retracting all jacks, the left front jack doesnt stop when it reaches its upper limit. Is there a limit switch that may need adjustment?

asked by: Chuck M

Expert Reply:

I spoke with my contact at Lippert regarding the issue you are having with the left front jack on your Ground Control 2.0 Leveling System. He said it sounds like there might be an issue with the calibration on the system. What he recommends doing is first inducing an error code by unplugging one of the jacks. Once you get the error, extend all the jacks at least 6 inches. Then press and hold the RETRACT button until all the jacks begin retracting. This will reset the system (as well as clear the error message).

After performing this procedure try using the system like normal to see if the left front jack operates correctly again. If not please let me know and I will be happy to look into this further.

expert reply by: Chris R