Needed Replacement Key for Pep Boys Cargo Box

Question

Question:

I have a broken key for my Pep Boys Cargo Box with lock 2820. Do you know if I can purchase replacement keys?

asked by: Liz B

1

Helpful Expert Reply:

Almost all of the Pep Boys cargo boxes were re-branded Sportrack cargo boxes. Since you have the 2820 lock, the correct replacement key for you would be part # THKEYN2820 by Thule. Thule is the parent company for Sportrack, so hopefully explains all of the different brand names involved here.

expert reply by: Timothy G

1

Answer 1

Hey Daryl, thanks for reaching out! You definitely came looking in the right place because we have what you need with the Replacement Key #THKEYN2820. Thule helped to make the Voyager cargo boxes so their keys work as interchangeable. What do you…

view full answer...

Answer 2

For your Pep Boys Voyager XL Cargo Box, you can use the: -Replacement Lock Core and Key for SportRack Explorer Cargo Box #SR03807 for a replacement lock core and key, and the Replacement Lock Locator for SportRack Skyline XL Cargo Boxes #TH03808 for…

view full answer...

Answer 3

Hey Sheena, Thule made the Voyager XL cargo box so the replacement key is part #THKEYN2862 for the 2862 lock.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Needed Replacement Key for Pep Boys Cargo Box

Product Page this Question was Asked From

Continue Researching