Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
Updated 06/21/2018 | Published 06/19/2018
Products Featured in This Question
Question:
I am looking for replacement hub assemblys for a 1993 Coleman Cap Cod tent trailer that have a part# of 4716A1071. Do you have a match for this?
asked by: Walker S
Expert Reply:
My research indicates that the Coleman part 4716A1071 refers to a Dexter 7 x 2-inch hub/drum with a 5-lug pattern. We have several options in this size hub/drum that are displayed on the linked page; all have the 5-on-4-1/2 bolt pattern and all are rated for 2K axles. We have hubs for both standard spindles and also for EZ-Lube spindles.
All you need to do to select the correct replacement hub/drum is confirm which bearing is used in yours. It should be either # L44643 or # L44649 since all of our hubs use one or the other. Please refer to the linked photo to see where to look for the part number on your bearings. Do note that some hubs are specifically intended for hydraulic brakes; they are so noted on our site.
If the camper has electric brakes then I suggest the cost-effective etrailer hub # AKHD-545-2-1K if yours uses bearing # L44643, or part # AKHD-545-2-EZ-1K if it has this bearing and also EZ-Lube spindles.
If you wish to tell me your bearing number, spindle type and brake type I will be glad to confirm the correct item.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - L44643 - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.00 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Video: Comprehensive Review: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 10' Long
- Shop: etrailer 7-Way RV Style Connector with Molded Cable - Trailer End - 6' Long - RV Standard
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: l44649
- Search Results: bearing l44649
- Article: Trailer Wiring Diagrams
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Search Results: 7" drum
- Q&A: Smallest Wheel Size that Can Fit on Dexter 10 inch Diameter Hub/Drum
- Q&A: Availability Of 7" Hub/Drum With L68149 / L44649 Bearings And 5 on 4-1/2" Bolt Pattern
- Q&A: Does it Matter Which Wires are Power or Ground for Electric Trailer Brakes
- Q&A: Parts Needed To Add Electric Drum Brakes To 1994 Jayco Pop-Up
- Video: Hopkins Trailer Wiring Harness Installation - 2022 Chevrolet Colorado
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: An In-Depth Look at the Easy Grease Trailer Hub and Drum Assembly for 2K Axles
- Video: What to Know About the Trailer Hub and Drum Assembly
- Search Results: l68149 trailer hubs and drums
- Search Results: tapered spindle
- Q&A: How To Send Constant Power to 12 Volt Pin On Trailer Connector On 2020 Ford F-350
- Search Results: trailer hubs and drums
- Search Results: trailer brake drum
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
on Trailer Bearings Races Seals Caps
