An In-Depth Look at the Easy Grease Trailer Hub and Drum Assembly for 2K Axles Video

My research indicates that the Coleman part 4716A1071 refers to a Dexter 7 x 2-inch hub/drum with a 5-lug pattern. We have several options in this size hub/drum that are displayed on the linked page; all have the 5-on-4-1/2 bolt pattern and all are…

I was able to verify that we do have a hub and drum compatible with 13 inch wheels, but the Easy Grease Trailer Hub and Drum Assembly for 2K Axles #AKHD-545-2-EZ-2K is only compatible with 10 inch or 12 inch wheels. Instead, what you will need is one…

There is no specific torque rating for the castle nut that holds your hub in place. We recommend tightening the castle nut down until it stops, and then backing it off to the next notch wheel the tang washer will fit into the castle nut. Over…

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

The correct replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes is the Dexter Hydraulic Trailer Brake Kit part #23-398-399. If you are having trouble removing the old brakes, I recommend applying heat but you can cut the nuts off worst…

The current hub for your Torflex #9 axle uses the inner and outer bearings #L44649 with a grease seal that has a 1.500" inner diameter. You can find the bearing kit as part #BK1-150 on our site. For a replacement hub we have the part #8-91-05UC1…

We do have the Dexter Trailer Hub and Drum Assembly for Standard #8-271-7UC3 or EZ Lube #8-271-7UC3-EZ axles. These are the 8-271 hubs you have with the 5 on 4-1/2" bolt pattern. These fit on a 1-1/16" diameter BTR spindle. They include all…

The Dexter Electric Trailer Brake Kit part #23-47-48 does not come with hubs/drums. If you would like to add these as well you'd need the Easy Grease Trailer Hub and Drum Assembly for 2K Axles part #AKHD-545-2-EZ-2K for L44649 (1.063") or…

You are correct that these two hub and drums are exactly the same but one has a standard grease cap and the other has an E-Z Lube grease cap for E-Z Lube spindles, so both will fit 12" to 15" wheels. The correct one for you will simply…

The Easy Grease Trailer Hub and Drum Assembly for 2K Axles #AKHD-545-2-EZ-1K includes the 1" inner diameter Bearings #L44643. The Assembly #AKHD-545-2-EZ-2K includes the 1-1/16" inner diameter Bearings #L44649. To determine which ones will…

When determining if you need 10 inch or 12 inch brake assemblies there are a couple of easy things to check to confirm the fit for your trailer. The first thing is you can measure the diameter of your hub. The second thing is you can look at the…

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…