Comprehensive Review: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable Video

It's a wire color difference but not a function difference on the pins of the 7-way. The difference comes from the fact that the two different styles are representative of two different areas that uses trailers. Traditional is usually seen on…

I have a couple options for you as we do not have a double ended 7-Way Molded Trailer Wire Connector in a 10' length. First you can take a 7-Way Molded Connector w/ 10' Cable #50-67-005 and add a 7-Way RV Style Trailer Connector #A7WCB. Or…

According to my research, the correct replacement head for your Reese 113066 is the Replacement Head for Reese Weight Distribution System #RP58167.

I have a solution for you, but the main issue with puck style lights that mount to the surface of your RV ceiling or under cabinets, is that there aren't replacement bulbs available and they aren't really designed to have the bulbs replaced.…

In regards to replacing a trailer connector on a trailer with an option like the Mighty Cord 7-Way RV Style Trailer Connector w/ Molded Cable part #A10-7W8, you need to match wires by function not color. In other words, if there is a green wire on…

There are some tests you can do to determine where the problem is: brake controller, truck, or trailer. First, in the truck cab you will need to sever the blue wire several inches from the back of the controller. Then use a circuit tester such as…

For the 7-way trailer plug #A10-7W10 the wiring configuration is as follows: Yellow: auxiliary and reverse lights Green: tail lights Brown: right turn and brake lights Blue: electric brakes Black: 12V battery charge Red: left turn and brake lights…

You likely can use any replacement switch since all they do is complete a circuit when the pin is pulled out. One wire on the switch should be connected to the positive battery terminal on the trailer. The other will tee into the wiring leading from…

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

The brown (running light) wires all run to each other as they carry the same circuit. The reason there is two browns on the trailer side is because there are running lights that are on both sides of the trailer. Aside from that all the rest of the…

There isn't really a lot of differences between the Hopkins 7-Way RV Style Connector with Molded Cable - 8' Long - RV Standard #H20046 and Hopkins 7-Way Blade Style Connector with Molded Cable - 8' Long - Auto Standard #HM20041. Both are…

Thank you for the picture of your Kedu HY60D switch, the Single Momentary Reversing Switch #37213865 has the same 4 prong connection on the back as your pictures. The cutout dimensions for this switch are 0.835" tall x 1.457" wide.