Availability Of 7" Hub/Drum With L68149 / L44649 Bearings And 5 on 4-1/2" Bolt Pattern
Updated 09/26/2025 | Published 04/26/2025
Products Featured in This Question
Question:
I am looking for 2, 7 electric brake drums, 5x 4.5, inner bearing is 1 3/8 L68149 and outer bearing is 1 1/16 L44649. I could not find one on your website. Do you have anything like this ?
asked by: Kirk R
Expert Reply:
Hello Kirk, thanks for reaching out. We do offer L68149 / L44649 drums with the 5 on 4-1/2" bolt pattern, but they are all 10" drums like part # AKHD-545-35-EZ-K. We do not have a 7" drum that uses that bearing combination.
What we would probably advise doing here is going with a 10" brake assembly if possible. I am not aware of any hub that would match your specs so you may have a hard time finding compatible parts going forward.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: 7" drum
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Q&A: Uni-Servo Hydraulic Trailer Brakes For 7 Inch Drums
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb Axles - 5 on 4-1/2
- Search Results: tapered spindle
- Search Results: l68149 trailer hubs and drums
- Search Results: 7 drum
- Q&A: Smallest Wheel Size that Can Fit on Dexter 10 inch Diameter Hub/Drum
- Search Results: 2200 lbs axle trailer brakes
- Search Results: trailer brake drum
- Video: Breaking Down the Trailer Hub and Drum Assembly
- Video: Hopkins Trailer Wiring Harness Installation - 2022 Chevrolet Colorado
- Q&A: Replacement 7-Inch Hub/Drum for 1993 Coleman Cape Cod Pop-Up Tent Trailer
- Video: What to Know About the Trailer Hub and Drum Assembly
- Video: An In-Depth Look at the Easy Grease Trailer Hub and Drum Assembly for 2K Axles
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: How To Send Constant Power to 12 Volt Pin On Trailer Connector On 2020 Ford F-350
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing kit - DX87UR
- Video: All You Need to Know About the Brake Mounting Flange for 1-3/4" Round Trailer Axles
- Article: Trailer Tire Sizing
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Q&A: Replacement Electric Brakes For A 2023 Brinkley Z 3100 5th Wheel With 7k Axles
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
on Trailer Hubs and Drums
Jesse M.
9/26/2025
Hey Kirk, did you decide to go with a 10-inch brake assembly as suggested? I'm curious to know how it worked out for you, as it could help others facing similar challenges.