Replacement Parts for EZ Loader Trailer with DICO Model 10 Actuator & Reliable Sure Lube Hubs

Updated 05/17/2018 | Published 05/16/2018

Products Featured in This Question

Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 12,500 lbs

(173)

$638.13

Kodiak Hydraulic Brake Line Kit - Single Axle - 18'

(154)

$150.32

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized

(105)

$163.06

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2832)

$15.39

Mounting Bolts and Hardware for 10" Brake Assemblies

(96)

$31.41

Dexter Hydraulic Brake Kit - Free Backing - Galphorite - 10" - Left/Right Hand - 3,750 lbs

(147)

$209.90

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(266)

$77.10

Solenoid Shield for Dexter Model 10 and Model 20 Trailer Brake Actuators - Zinc

(14)

$22.50

Question:

EZ Loader Trailer with DICO model 10 actuator & Reliable Sure Lube Hubs The trailer was used in salt water and then neglected for several years by the previous owner. I am looking at replacing the actuator, brake assemblies, bearings, seals, and possibly the hubs. I could use some help in ing the best, correct parts. Thank you for your help and consideration with this.

asked by: Dick G

Helpful Expert Reply:

For your EZ Loader Trailer with DICO model 10 actuator and Reliable Sure Lube Hubs, I absolutely have recommendations for you.

The Titan Zinc-Plated Brake Actuator # T2477600 is the Titan model 10 actuator that is nearly identical to the DICO model 10 you are replacing. If you want the electric lockout, you can use # T4748800 and Shield # T4836100183.

For your brake assemblies, I recommend the Titan Hydraulic Brake Kit - Free Backing - Galphorite # T4423500-400 and mounting bolts # BRKH10A.

If you choose to replace your hubs, I recommend the Trailer Hub and Drum Assembly - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-K. You will want to confirm bearing sizes with your current hubs prior to ordering. If you just want the bearing kit, I recommend the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100.

If you need to replace your brake lines as well, I recommend the Kodiak Hydraulic Brake Line Kit - Single Axle - 18' # 18SI-BLKIT.