Recommended 2 Bike Rack For 2013 Honda Fit Sport Where Trunk Mounted Racks Wont Fit

Question

Question:

Jason, despite warnings that the Hollywood Over-the-Top trunk rack (2 bike) will not work with Honda Fit Sport Models because of cleArance and weight on the spoiler, look at our installation and you will see it works great! Straps do not come close to spoiler contact. Please let other Sales and Tech reps know and perhaps post my picture. Can you send lock accessory information? The over the top Hollywood rack works great on the Fit Sport. Straps do not come into contact with the spoiler. Regards

asked by: DAve M

0

Expert Reply:

I reached out to my contact at Thule and they confirmed they do not have any fits for your 2013 Honda Fit Sport Model. They said the reason is the factory spoiler is not strong enough to support the straps. All of our manufacturers exclude the Sport model for this reason.

My recommendation is to use the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11064 and then use the Thule Doubletrack Pro XT Bike Rack # TH92BJ which is a confirmed fit along with the support strap # 18050 which is required for the hitch.

expert reply by: Jason S

0

click to enlarge

David

5/15/2018

I reached out to my contact at Thule and they confirmed they do not have any fits for your 2013 Honda Fit Sport Model. They said the reason is the factory spoiler is not strong enough to support the straps. All of our manufacturers exclude the Sport model for this reason. My recommendation is to use the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24826 and then use the Thule Doubletrack Pro XT Bike Rack # TH92BJ which is a confirmed fit.

Jason S.

5/15/2018

The Hollywood Racks Over-the-Top 3 Bike Rack for Vehicles w/ Spoilers # HRF2-3 or 2 Bike rack # HRF2 is made specifically for spoilers and fits most vehicles, but unfortunately they don't confirm a fit for your Fit Sport. If you choose to go that route anyway, I recommend you use the security strap # TH533 and cable lock # CAB-10 to secure your bikes to the rack and the rack to the locked hatch. I also recommend the Softride Soft Hook-and-Loop Tie Down for Bike Racks # SR18679 to secure your front wheel to the frame of each bike and the Swagman Deluxe Bike Frame Adapter Bar for Women's, Children's, and Alternative Frame Bikes # 64005 to help them travel level and give you the ground clearance needed. I've attached videos to assist.

Dave

5/22/2018

Jason, despite warnings that the Hollywood Over-the-Top trunk rack (2 bike) will not work with Honda Fit Sport Models because of cleArance and weight on the spoiler, look at our installation and you will see it works great! Straps do not come close to spoiler contact. Please let other Sales and Tech reps know and perhaps post my picture. Can you send lock accessory information? The over the top Hollywood rack works great on the Fit Sport. Straps do not come into contact with the spoiler. Regards

Jason S.

5/22/2018

Thanks for the picture and proof that the # HRF2 works on your Honda Fit Sport. As for the recommendation on locks, I recommend the Deadbolt 10' Long Cable Lock # e98891 to secure your bikes to the rack and the Thule Passive Security Strap for Trunk Mounted Bike Carriers # TH533 to secure the rack to your locked hatch. If you have step through frames, use the adapter bar # 64005 for a level transport and proper ground clearance.

Answer 1

The Curt Trailer Hitch Receiver part #C11064 is a great option for a 2013 Honda Fit. It does sit low to the ground but that is to be expected since the vehicle itself sits low to the ground. That said, you won't have any issues with any hitch…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hi Kathy, I do have an option for you with the Curt Reducer Sleeve #C49WQ, but there is no magnetic 2" to 1-1/4" reducer available. The above sleeve will go into your 2" reducer and will neck it down to the 1-1/4" receiver size so…

view full answer...

Answer 8

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7286 is an excellent option for a 2013 Honda Fit, it's the only one with a 2" receiver tube opening in fact. In regards to trimming, this will be very minor. I have attached a photo that…

view full answer...

Answer 9

This is a good question but trailer wiring cannot be used in reverse to act as tow bar wiring. But we do have a plug and play option that does fit your 2009 Honda Fit with the part #HM56302 which is what it sounds like you are looking for.

view full answer...

Answer 10

Hi there, I understand the frustration square axles can make things a little trickier. At this time, we don’t carry an over under kit specifically designed for square or rectangular axles. That said, you can still gain lift by flipping the axle…

view full answer...

Answer 11

For your 2012 Honda Fit I recommend the #306-X7286 EcoHitch Trailer Hitch Receiver. This Class II hitch has a 2" receiver opening with a maximum gross trailer weight of 2,000 lbs and tongue weight of 300 lbs. As for the 2015 hitch, a hitch from…

view full answer...

Answer 12

I attached a link to a page that shows where you can find a local installer to you for the EcoHitch part #306-X7286. The hitch would probably take two hours to install so you'd be looking at two shop hours at the rate of the installers.

view full answer...

Recommended 2 Bike Rack For 2013 Honda Fit Sport Where Trunk Mounted Racks Wont Fit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching