Replacement Trailer Hub for 1.06 Inch Straight Spindle on Boat Trailer
Updated 04/26/2018 | Published 04/25/2018 >
Products Featured in This Question
Question:
I need a hub for a small boat trailer. It has a 1.06 straight spindle, a 5 by 4 1/2 bolt pattern and the current hub is 3 1/2 inches high. Please let me know which one of your hubs will fit. I believe the trailer is a load right and only carrying a 135 pound Gheenoe with a 4 hp Yamaha motor. Thanks,
asked by: Charlie O
Expert Reply:
Based on the 1.06 inch measurement you provided for your trailer spindles, you need a replacement hub assembly that uses the # L44649 inner and outer bearing. It might also be a good idea just to verify this by pulling an existing hub and checking for the bearing numbers that should be stamped onto the bearings themselves.
For your trailer, I recommend the Dexter Trailer Hub and Drum Assembly # 8-257-5UC3-EZ if you have brakes on the trailer or # 8-258-5UC1-EZ for an idler hub. Since it is a boat trailer, you might also consider a galvanized hub like the etrailer # AKIHUB-545-2-G-2K that will be resistant to rust and corrosion.
All of these hub assemblies include the needed bearings and seal.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Terran Industries Trailer Idler Hub Assembly for 3,500 lbs Axle - 5 on 5
- Search Results: bearing buddies
- Search Results: 480~12 trailer tires and wheels
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle - Bearings L44649/L44649, Races L44610/L44610
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Bearing Buddy Bearing Protectors - Model 2717A-SS w/ Auto Check - Stainless Steel - Qty 2
- Search Results: dexter trailer hubs and drums
- Search Results: dexter bearings
- Video: Comprehensive Review: Dexter Electric Trailer Brakes
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Why Can't 13 Inch Wheels Fit Trailer Hubs Designed for 12 Inch Wheels
- Q&A: Comparing etrailer and Dexter Axle 12" Electric Brake Kits
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Correct Bearing Kit for Dexter 2,000 Lb Torsion Axle SLR P-12
- Q&A: Why do Dexter Trailer Brake Assemblies Cost More than etrailer
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Video: Review of the Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: A Closer Look at the Replacement Trailer Hub Bearing
- Video: All You Need to Know About the Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Replacement Square 1.5" Spindle for a Boat Trailer
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



