Replacing Frozen Diversi Tech or Fastway Locks that are Frozen and Not Working

Question

Question:

I have you DT adjustable hitch that requires a 5519 key for both key holes adjusting vertical and horizontal adjustment. The vertical adjustments are frozen and the key LPS have broken trying to repair and lubricate this issue. Is there a stronger key you can provide since my hitch is now inoperable? This kit should really be provided a stronger set of keys. I need your help to continue to use your product. Please help and contact me directly with any assistance.

asked by: William S

0

Expert Reply:

I reached out to my contact at Fastway/ Diversi Tech and he said the only replacement key for your current lock cylinder is # DTKEYR5519. If your cylinder is locked up, he suggests using air tool oil or I suggest a penetrating oil.

The final option is to replace the locks with the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks # DTLBM02RK.

expert reply by: Jason S

0

Answer 1

You can purchase Re-Keying Kit, #DTLBM02RK, to re-key your ball mount. The kit includes a tool to remove the locking cylinder you have in the ball mount now. Once you receive the kit, you will need to put some air tool oil in the hole that the lock…

view full answer...

Answer 2

It sounds as if you have a Diversi-Tech or Fastway adjustable ball mount like part #DTALBM6600. I spoke with the manufacturer, who recommends that you use air tool oil to lubricate the lock and the pins that lock the ball mount into the hitch…

view full answer...

Answer 3

When not in use you should remove the Self-Locking, Adjustable, Aluminum Ball Mount #DTALBM7025-3S, because the locking mechanism can seize up. This is a common issue with any lock that is exposed to the elements long enough. It doesn't sound…

view full answer...

Answer 4

I contacted the manufacturer about replacing the hitch ball on the #DTALBM6825, which is the self-locking series. The representative informed me that it is recommended to send in the #DTALBM6825 in the event that the hitch balls need to be replaced.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Replacing Frozen Diversi Tech or Fastway Locks that are Frozen and Not Working

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching