Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Do-it-yourself lock kit lets you replace up to 2 locking cylinders in your Fastway (Diversi-Tech) ALBM or LBM series self-locking aluminum ball mounts. Both locks are keyed alike to help you cut down on the number of keys you have to carry.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts, part number DTLBM02RK. This kit is perfect if you've lost your keys or your locks become damaged. It comes with everything you need to replace two locks. Both locks are keyed alike and four keys are included. Now we'll go ahead and show you how to replace them. First, we want to go ahead and remove our old lock cylinders. What we want to do is peel back the silver warning sticker right here.
There's going to be one on each lock. By peeling back the warning label we've located our set screw. We can go ahead and take our included Allen and take that on out. Now, if you've had your lock for awhile it may be a little corroded, so it's not a bad idea to go ahead and hit that with some penetrating oil and let that sit for a little bit. Let's go ahead and take it out.
Make sure it's all the way in. Now with our set screw removed, our lock cylinder should just come right on out. If you're having trouble getting it out, just go ahead and hit it with some more penetrating oil and give it a second to soak in, and just give it a tug and it should come out. Now, inside you can see our cam actuator. This is what allows our lock to operate our pin. What we'll need to do is, we'll take our new lock cylinder and we'll need to line up this portion here so it fits inside the lock actuator.
We'll also need to be sure that the indentation on top, that's what our set screw is going to go into. We'll also need to grab our new dust cap and that's going to go in the bottom indentation here. We'll put that in slightly, make sure our lock cylinder's lined up, and then we'll push them both in together just like that. Now we can take our included tool and our new set screw, and thread that in. Now, you want to be sure that your lock cylinder is pushed all the way in as far as it will go. We'll just get that started.
You also want to be sure not to over tighten. Just get it nice and snug. All this is meant to do is to hold that lock cylinder in place and prevent it from coming out. Now you want to be sure and try it out and make sure that it works. I'd say it works pretty good. Now that we know everything works, we can go ahead and take our new warning label and apply that on top. Perfect. Good as new. Now we can repeat the same process for our second lock cylinder. That's going to complete our look at the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts, part number DTLBM02RK, .
Arrived sooner than expected.
Took a slight modification on the pin to get them to work but once that was done they worked like a charm.
Now I can use my hitch that has been just taking up space in my garage.
I will order from here again if the need arises in the future for other trailer parts
Hard to remove old parts one set screw had to recap #4-40 but new part work great like new.
Kenneth B.
7/18/2025
Working great
Nick S.
7/18/2025
Ordered re-key kit and problem solved with hitch. Courtney was very helpful and shipping was fast. Thanks
I was very excited to find this product. My hitch key broke off in the lock, so I thought I had an expensive paper weight. This kit was easy to install and works great. Thanks for selling products that help me save money.
This is a very practical kit when you have lost all the keys, it allows you to remove the tow ball as when it was new.
I love the hitch! Only concern I have is the balls have seemed to become loose in the fixture. Is this a concern?
Excellent experience
Haven't installed the new trailer hitch lock yet
Very confident that this will solve my trailer hitch security problem.
I didn’t need to rekey it, the keys you sent unlocked it. I’m a happy camper right now.
The rekeying kit came as promised with all appropriate items required to rekey my trailer hitch. Etrailer customer service has been excellent, I will gladly recommend this company to anyone that requires their services or products.
I am rekeyed and ready to go!
I would give 5 stars but this is the 3rd set of locks I've replaced. This whole unit has to be kept moving or it gets difficult to lock and unlock. Also, just sliding the ball bracket up and down gets difficult. Other than those little things, good design IMHO.
I’ve ordered before and always have a positive experience
Just replacing a faulty lock. Package was said delivered on 11/8, was not. Contacted etrailer. Said they would look into it. Never heard from etrailer again. Started my own investigation through the USPS. Package was located by me 3 days later, no thanks or help from etrailer. Pathetic customer service...
exactly what I needed! swapped out the old, put in the new, and I'm able to use my hitch again. thank you!
The replacement locks are just what I needed. Sure cheaper than buying a new hitch. They were delivered in timely manner, and were very easy to install. The install took less than 10 minutes.
Someone tried to remove my hitch, really screwed up one of the key sets. Luckily it was on the ball set so i could remove it from the receiver. Was about to trash it but i emailed etrailer and received a link to the replacement key sets needed for re-keying. Followed the directions and after letting the set screws soak as directed it took about fifteen minutes to replace both key sets. I have made several purchases from etrailer, this is the first time i have had to use customer service. First rate, recommend them to everyone!!
Randy M.
5/29/2017
Product is holding up great, Really great service also!!
did the job as advertised. tiny set screws are a pain the ass to get out of the old hitch. be patient on that part. after that its easy.
Tail piece on the lock cylinders need a little massaging but worked perfect.
I purchased a vehicle with Diversi-Tech hitch and the previous owner lost the keys to it. This kit enabled me to over-come that problem, quite easily. The old re-keying kit was easy to remove, using a video that was available on etrailer.com. It only took some WD-40, an allen wrench, and this kit. Love it!
Worked great... used this as a replacement since I lost the keys to my hitch and it was locked on the truck... was simple to replace!
Mike
5/26/2016
Worked out great thanks!
I’ve had my tow hitch for a little over 6 years and recently tried to remove the hitch and ended up breaking off the key inside the camlock. Luckily I found etrailers which carried replacement locks. After following the instruction included in the package,I removed my old locks and installed the new locks. Great product!!
The new parts worked perfectly. The only issue I had was removing the very small set screw. 1 came out just right the other took a lot to get out and repair.
Fast shipping exactly what I needed in order to keep from buying another hitch setup, wil do all my shopping with etrailer.com.
Don't hesitate on ordering, cause you won't find better service or shipping.
Thanks again etrailer for the help.
Excellent! We were really happy with both the kit and the customer service (while we were trying to figure out which kit we needed). Thank you, sincerely. etrailer.com will for sure be our "go to" should we need more trailer parts/solutions in the future.
My hitch had tried to be stolen. The lock set (for locking into the receiver) had been deformed. I was able to do some judicious grinding and removed the damaged lock set. The new sets are an easily R&R. Although the locking pins for the receiver take a bit more effort now all is in good working order. Fast order and shipping was a plus!
I needed a special built in lock for a trailer hitch and etrailer had it. I called to confirm the fit and the individual I talked to was very knowledgeable and within a short time I received it. I highly recommend etrailer.
i
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
5/8/2025
Glad that you are able to use your hitch again, Jim! Our door is always open when you need us next! We carry a lot more than just trailer parts too :)