How to Lubricate Fastway/Diversi-Tech Locking Ball Mount

Question

Question:

I have a ball mount hitch that has the two sizes of ball on it. I am having difficulty in turning my key to install the hitch. Also the adjustment key is hard to turn.what can be done and how can it be done to rectify this problem. Like the hitch just dont want to break the key off.

asked by: Gordon H

1

Helpful Expert Reply:

It sounds as if you have a Diversi-Tech or Fastway adjustable ball mount like part # DTALBM6600. I spoke with the manufacturer, who recommends that you use air tool oil to lubricate the lock and the pins that lock the ball mount into the hitch receiver. This is something that you might need to do several times before everything frees up. They also recommend that you remove the ball mount from the hitch when it's not being used.

expert reply by: Mike L

1

click to enlarge

Answer 1

I contacted the manufacturer about replacing the hitch ball on the #DTALBM6825, which is the self-locking series. The representative informed me that it is recommended to send in the #DTALBM6825 in the event that the hitch balls need to be replaced.…

view full answer...

Answer 2

When not in use you should remove the Self-Locking, Adjustable, Aluminum Ball Mount #DTALBM7025-3S, because the locking mechanism can seize up. This is a common issue with any lock that is exposed to the elements long enough. It doesn't sound…

view full answer...

Answer 3

I reached out to my contact at Fastway/ Diversi Tech and he said the only replacement key for your current lock cylinder is #DTKEYR5519. If your cylinder is locked up, he suggests using air tool oil or I suggest a penetrating oil. The final option is…

view full answer...

Answer 4

You can purchase Re-Keying Kit, #DTLBM02RK, to re-key your ball mount. The kit includes a tool to remove the locking cylinder you have in the ball mount now. Once you receive the kit, you will need to put some air tool oil in the hole that the lock…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

How to Lubricate Fastway/Diversi-Tech Locking Ball Mount

Featured Help Information

Miscellaneous Media

Continue Researching