Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Do-it-yourself lock kit lets you replace up to 2 locking cylinders in your Fastway (Diversi-Tech) ALBM or LBM series self-locking aluminum ball mounts. Both locks are keyed alike to help you cut down on the number of keys you have to carry.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts, part number DTLBM02RK. This kit is perfect if you've lost your keys or your locks become damaged. It comes with everything you need to replace two locks. Both locks are keyed alike and four keys are included. Now we'll go ahead and show you how to replace them. First, we want to go ahead and remove our old lock cylinders. What we want to do is peel back the silver warning sticker right here.
There's going to be one on each lock. By peeling back the warning label we've located our set screw. We can go ahead and take our included Allen and take that on out. Now, if you've had your lock for awhile it may be a little corroded, so it's not a bad idea to go ahead and hit that with some penetrating oil and let that sit for a little bit. Let's go ahead and take it out.
Make sure it's all the way in. Now with our set screw removed, our lock cylinder should just come right on out. If you're having trouble getting it out, just go ahead and hit it with some more penetrating oil and give it a second to soak in, and just give it a tug and it should come out. Now, inside you can see our cam actuator. This is what allows our lock to operate our pin. What we'll need to do is, we'll take our new lock cylinder and we'll need to line up this portion here so it fits inside the lock actuator.
We'll also need to be sure that the indentation on top, that's what our set screw is going to go into. We'll also need to grab our new dust cap and that's going to go in the bottom indentation here. We'll put that in slightly, make sure our lock cylinder's lined up, and then we'll push them both in together just like that. Now we can take our included tool and our new set screw, and thread that in. Now, you want to be sure that your lock cylinder is pushed all the way in as far as it will go. We'll just get that started.
You also want to be sure not to over tighten. Just get it nice and snug. All this is meant to do is to hold that lock cylinder in place and prevent it from coming out. Now you want to be sure and try it out and make sure that it works. I'd say it works pretty good. Now that we know everything works, we can go ahead and take our new warning label and apply that on top. Perfect. Good as new. Now we can repeat the same process for our second lock cylinder. That's going to complete our look at the Fastway Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts, part number DTLBM02RK, .
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Jim
5/6/2026
The locks are still working great. I did have to order a .5 mm allen wrench to get them installed securely Once they were set i have not had any issue removing from the receiver or adjusting the height or flipping the hitch over.
Robert
4/3/2026
Been about a year and the new locks are working great. Highly recommended.
Lazer S.
4/3/2026
Kenneth B.
7/18/2025
Working great
Nick S.
7/18/2025
Randy M.
5/29/2017
Product is holding up great, Really great service also!!
Mike
5/26/2016
Worked out great thanks!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
5/8/2025
Glad that you are able to use your hitch again, Jim! Our door is always open when you need us next! We carry a lot more than just trailer parts too :)