Who Makes Easy Grease & Dexter 3,500 lb Trailer Hub & Drum
Updated 10/29/2025 | Published 05/13/2024
Products Featured in This Question
Question:
For your drum/hub assemblies, -Item 84546UC3-EZ -Item 84546UC3 -Item AKHD-545-35-G-EZ-K Who is the bearing and race manufacturer? Timken? And are all these compatible for a 84 spindle? Who manufactures the drum and are they a US company? And what is the grease seal full part number and manufacturer name? What is the difference between these 3 item numbers other than the 3rd is galvanized? Looks like some additional parts come with the EZ model but whats specified is not clear other than what shows in the pictures. Is the price for single drum hub or the pair? Thank you. Ed
asked by: Ed
Expert Reply:
Hey Ed,
The Easy Grease Trailer Hub/Drum Assembly # AKHD-545-35-G-EZ-K uses grease seal # 58846 and are made by AxleTek, who is not in the U.S. The Dexter Trailer Hub & Drum Assembly # 84546UC3-EZ and # 84546UC3 uses the same grease seal part number, though the hub/drums and bearings/seals are from Dexter, which is a U.S. company.
The difference is the # 84546UC3-EZ is both pre-greased, comes with the washers and cotter pin, as well as a standard grease cap and EZ-Lube grease cap if you have EZ-Lube spindles. They are each compatible with a #84 spindle and the price is for a single hub/drum.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: trailer brakes
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: bearing grease
- Search Results: grease
- Search Results: trailer brake pads
- Search Results: trailer hubs and drums
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Is Additional Grease Needed to be Pumped into Dexter Trailer Hub that is Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How to Determine Correct Replacement Hub & Drum
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: grease seal 58846
- Search Results: trailer bearings races seals caps
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Video: A Closer Look at the Mounting Nut for 7" and 10" Brake Assemblies
- Video: Checking Out the Lock Washer for Brake Mounting Bolt for 7" and 10" Brake Assemblies
- Q&A: Troubleshooting Electric Brakes That Do Not Work
- Video: Review of Dexter Trailer Hubs and Drums - Galvanized Pre Greased Trailer Idler Hub Assembly - DX77UR
- Video: Remove and Reinstall a Trailer Hub Review
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: How Tight Should Castle Nut be on Trailer Hub
- Q&A: Torque Rating For Hub Castle Nut
- Q&A: Should Spindle Be Replaced After Wheel Came Off Weekend Warrior Tri-Axle Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
on Trailer Bearings Races Seals Caps
Corey
10/29/2025
Hello, who manufactures the bearings and races in this drum & hub kit?