Are Dexter Trailer Hubs # 42656 and # 8-201-9UC3-EZ the Same Hubs
Updated 01/04/2018 | Published 01/03/2018
Products Featured in This Question
Question:
Are the grease cap flanges the same size on the AKHD-655-6-K and 8-201-9UC3-EZ drums? I am trying to replace Dexter EZ Lube drums only. The 201-9UC3-EZ has caps and bolts I do not need. The bearings included in the kit are correct but the rear seal in the kit is 2.125. I need 2.25
asked by: Mikd M
0
Expert Reply:
Yes, the hub part # AKHD-655-6-K and # 8-201-9UC3-EZ are essentially the exact same part.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: 42656
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Search Results: trailer brakes
- Search Results: dexter 008 201 09
- Search Results: 25580
- Search Results: hub
- Search Results: 67048
- Search Results: 008~201~05
- Q&A: Comparison of Quality and Weight Rating- etrailer Brand Versus Dexter Brand 12 x 2 Brake Assemblies
- Video: The Low-Down on the Mounting Bolts and Hardware for 12" Brake Assemblies
- Q&A: Replacement Hub/Drum for AL-KO 363239
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: What Size Nuts and Studs are Used to Mount 7 and 10 Inch Trailer Brake Assemblies
- Q&A: Nut for a 3/8"-24 Thread Brake Assembly Mounting Bolt
- Q&A: Differences Between Dexter 42866UC3-EZ and 8-219-4UC3-EZ Trailer Brake Hub/Drums
- Q&A: Does Trailer Wheel Hub/Brake Drum Need to Be Replaced if Inside Surface is Grooved
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly
- Video: A Closer Look at the Dexter Trailer Hub and Drum Assembly
- Video: All You Need to Know About the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Video: Review of Dexter Trailer Hubs and Drums - E-Z Lube Pre-Greased Trailer Hub Drum - 42866UC3-EZ
- Video: Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brakes