Replacement Hub/Drum for AL-KO 363239
Updated 09/25/2019 | Published 09/24/2019
Products Featured in This Question
Question:
I found the bearings, races, and grease seal through other peoples questions that you answered. After pulling the hub I found the brakes were bad. Found the brake assembly through a previously posted question. Thanks for having all these posted. Great site! Figured why not replace the Hub/Drum since having to replace everything else but didnt find it. Its an AL-KO part number 363239. 6 on 5.5inch bolt circle 15123. Bearings 15123, 25580. Do you have a whole assembly? Thanks
asked by: Tim
Expert Reply:
I was able to cross reference AL-KO 363239 and based on this you will need to use the Trailer Hub and Drum Assembly part # AKHD-655-6-K. That said, this comes with a 2.25" grease seal and you need a 2.125" grease seal so in addition to the hub/drum you also need the Grease Seal part # GS-2125DL. The correct braking assemblies are then going to be Electric Trailer Brake Kit part # AKEBRK-6.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 42656
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Q&A: Are Dexter Trailer Hubs # 42656 and # 8-201-9UC3-EZ the Same Hubs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Search Results: wheel stud
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: wire connectors
- Search Results: brake spoon
- Search Results: heat shrink tubing electrical tools
- Q&A: How to Find Replacement Electric Drum Brakes for a Trailer
- Video: How to Install the etrailer Electric Trailer Brakes on a 2009 Carriage Cameo Fifth Wheel
- Video: Checking Out the Trailer Hub and Drum Assembly
- Search Results: 5200 lbs trailer axles
- Search Results: al ko 12x2 electric brake assembly
- Q&A: Hub and Drum Assembly for AL-KO T-52 Axle
- Q&A: Recommended Self Adjusting Brakes for Al-Ko 4,400 lb Axles
- Q&A: Replacement Brakes And Hubs/Drums For 5,200lb Kelsey Hayes Co Axles
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub