Replacement Memory Mount Clamps for an Inno Lowdown Cargo Box

Question

Question:

Will these clamps work with an older model Inno Lowdown Cruiser Box?

asked by: Chris

0

Expert Reply:

The Inno Memory mount, part # INBRP9 will be compatible with your older LowDown Cruiser box.

expert reply by: Jacob W

0

Answer 1

Hello Joe, Yes, I looked up the dimensions of the factory crossbars for the 2021 HR-V and the Inno Gear Case 720 Rooftop Cargo Box #IN94YV will attach nicely to them. I am always curious on what people plan on using their cargo box for: sports,…

view full answer...

Answer 2

There isn't really a maximum tightness on the Inno Memory Mount Clamps #INBRP9 that you referenced. As long as the clamps are secured around the crossbars they are going to provide a safe attachment. I did check with Inno and found that there is…

view full answer...

Answer 3

Inno rack BR1200 is the same as the Inno Shadow #INBRA1210BK which the Memory Mount Clamps for Inno Rooftop Cargo Boxes Item #INBRP9 can be used with. The other box you mentioned is not compatible nor do we have any hardware that would work with it.

view full answer...

Answer 4

The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 #INBRP9 do not come with a new seal. I've attached photos of these mounts as they are often used for replacements or upgrades. The seal or molding is not available as a replacement part…

view full answer...

Answer 5

Hey Andrew, unfortunately the Memory Mount Clamps for Inno Rooftop Cargo Boxes #INBRP9 are not going to work with your older Inno LowDown Cruiser. Your only option to retro fit it is to drill holes in your cargo box and use the U-bolt kit #TH05603.…

view full answer...

Answer 6

The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 #INBRP9 are not able to be retrofitted to other cargo boxes like your discontinued Inno Lowdown Cruiser. The only retro-fit options are the style that use u-bolts like #TH05603 or standard…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Replacement Memory Mount Clamps for an Inno Lowdown Cargo Box

Product Page this Question was Asked From

Continue Researching