How to Choose the Correct Timbren Rear Suspension Enhancement for a 2012 Ram 1500

Question

Question:

I am looking into an upgrade to my 2012 Ram 1500 rear suspension. I occasionally tow a 10,000 lb car trailer and am interested in part # TDR1500DQ. I see also though that you have several variations of it with different weight listings. What, if any, are the downsides of having these over the lesser weight rated? Better ride while empty? Also, what are your opinions on the product? Thanks.

asked by: Neil J

0

Expert Reply:

The Timbren Rear Suspension Enhancement part # TDR1500DQ is an excellent option for your 2012 Ram 1500 as long it is not a regular cab. If you do have a regular cab then you will want to use the Timbren Rear Suspension Enhancement System part # TDR1500DS.

The higher the weight capacity the spring is rated for, the stiffer the spring will be. A softer spring will result in a better ride quality but a stronger spring will give you more support. For your 10,000 lb car trailer, I recommend going with the 8,600 lb jounce springs (part # TDR1500DQ). The springs will not be engaged while unloaded for the exception of driving over bumps or potholes.

I have attached a installation video for the 8,600 lb system installed on a similar 2013 Ram 1500 for you as well.

expert reply by: Conner L

0

Answer 1

I agree that the SumoSprings will offer a better ride than the Timbrens. Timbrens do offer a higher capacity and are recommended for vehicles that are under a constant load like a truck with a camper in the bed. The downside of the Timbrens is that…

view full answer...

Answer 2

A Timbren Rear Suspension Enhancement System is a great way to reduce sag on your 2016 Ram 1500. They're easy to install without any drilling by replacing the factory bump stop. If your Ram is a Regular Cab, you will need #TDR1500DS. If you have…

view full answer...

Answer 3

The SumoSprings Rebel Custom Helper Springs are only rated to -25 degrees Fahrenheit so if you'll be using the truck in temperatures below this then you may have to consider other options like the Timbren Rear Suspension Enhancement System. The…

view full answer...

Answer 4

The overall measurements of the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier #LC125460 is 99-1/2 inches long overall and 23 inches wide at the mounting brackets. The length at the mounting brackets is 78 inches. Please see…

view full answer...

Answer 5

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 6

I recommend installing the Timbren Suspension Enhancement System #T65MR on your 2022 Toyota Tundra. These rubber jounce springs are designed to provide added support when used with slide in campers like you have or other heavy items like a salt…

view full answer...

Answer 7

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 8

Good Questions! Long story short there is never a time air bags are required. That being said it is a really really good idea to have them for the sake of the hauling rig. Using an airbag kit like the Firestone Ride-Rite Air Helper Springs - Double…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

How to Choose the Correct Timbren Rear Suspension Enhancement for a 2012 Ram 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching