Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
With a folding mechanism that provides access to rear storage, this universal-fit tire carrier from Stromberg Carlson is an excellent tool for all travelers.
Features:
Specs:
California residents: click here
Looks to be well made,will adapt it to my needs and last many years.
Product was as advertised. Shipping was not only free as I qualified, but also moved up to the next level and it arrived before I expected.
Item as described very fast shipping A+++
Good build quality. Works well. No trouble installing. Would recommend this one.
Purchased to hang spare of travel trailer w/ 4" square bumper. Well made. Simple, easy, intuitive install. Now, the spare is outside and storage well is freed of space. Happy Camper.
Well Made Spare Tire HolderWhen I purchased my used travel trailer it did not come equipped with a spare tire carrier. This carrier is made of good quality and easy to install. The the shipping was super fast. I am a repeat customer of etrailer.
Great product! I have a 1991 Jeep Cherokee, the factory location for a spare tire is in the rear cargo area. I didn't want the spare tire inside, taking up cargo space. With very little modification, drilling a couple of holes, I relocated the spare to the rear bumper. I put it in between my passenger side taillight and the license plate. This is an excellent alternative to the swing away tire carriers that start around $350.
Here's some photos of the installed spare tire carrier which also serves as a fold down stainless steel table on my cooker trailer. Thanks for all your help.
Rather cheap. What you can expect from China. The lug nuts aren't long enough to get a wrench on when tightened on a rim. The locking tabs to hold the carriage bolt in place don't work: they prohibit the rim from pulling up tight. One bolt goes into a hole on the rim and the other is supposed to hold that bar across the hole in the rim but the carriage bolt wasn't long enough. I had to get a ny-lock for that and the U-bolts. Not sure I would expect my spare to still be on the bumper with this one. I mounted it on the A-frame on the front and it almost sits on the A-frame so it shouldn't go anywhere.
Great spare tire carrier and easy to install. Directions did say for 15" and 16" rims only, but when looking on the etrailer website it said it would still fit my 5 x 4.5 bolt pattern on my 14" rim (the reason why I bought it.) Sure enough, the wheel mounted right up to the carrier. I bought this because when I got my travel trailer it did not come with a spare tire or carrier and it better to be safe than sorry. I would definitely recommend or buy again.
The TR-2 folding tire carrier arrived on time and in good condition. It was well-packaged and all of the parts were there. The powder coating looks good. Other reviewers have mentioned that the open rectangular section bends down over time due to the weight of the tire bouncing up and down. I added a custom bracket to prevent this from happening. See pictures. The bracket was made from an 11-inch long piece of 2-inch by 2-inch by 1/16-inch (16 gauge) cold-rolled mild steel angle iron purchased at my local Ace Hardware. To make the bracket I used a tape measure, a pencil, a heavy vice, a hacksaw, a 2-pound hammer, a large crescent wrench an electric drill, and a can of black spray paint. To install the bracket I used 1/4" bolts, nuts, flat washers and lock washers. I have not yet mounted it on my trailer, but will update this review after I've done so and have used it for a while.
My old spare tire mount let the tire drag on the ground while exiting a camp site, bending the mount. The new mount elevates the tire and the position is much better. The included 4 1/2" U-bolts were too large for my small trailer frame. Installation required purchasing 4" U-bolts sized for my trailer's frame which I bent slightly to fit the 4 1/2" holes on the mount. The result is excellent, very strong and secure with the increased ground clearance I wanted. This is a much better spare tire mount than the one I replaced.
Looks good, haven’t installed yet but it looks like it will fit nicely on the tongue or the rear bumper.
Good,tight fit. Sturdy.
This spare tire carrier is better than the boat-type carrier that came factory-original on my Aliner. It mounts the spare about one foot higher, which makes it safer and more protective in the event of a SLIGHT rear-end collision. I would've given it a 5-star rating except that the vertical piece through which the two shoulder bolts are inserted has the holes oriented perfectly vertically, which is not the way that 5-hole lug nuts are oriented on a tire rim. Plus, my rims aren't flat-faced, they're dished. In the final-mounted photo you can see I had to fabricate a piece of steel to accommodate the dished rim. This was a somewhat minor inconvenience, but inconvenient nonetheless as it wasn't "plug & play" out of the box.
Called to get help with my spare tire carrier. Very professional and helpful
Received it before promised. Works perfectly
I bought this to replace the undercarriage tire carrier on my 2018 Cougar. I have my reasons for doing this. Nonetheless, moving the carrier to the rear bumper makes it a lot easier to access when needed, I decreased the tongue weight, and I can put a tire cover on it. I also did not want the tire/assembly full of snow/slush, sand and salt this winter in the northeast this December.
The new carrier fit perfectly, up tight against the bumper. There is some rotational movement of the upright support with the tire mounted (a previous review may have mentioned this). My 15in spare weighs 48.2 lbs and the carrier has a 60lb rating (hope Stromberg Carlson builds in some safety margin). I will be putting a safety cable/chain on it just in case.
4 stars for now, we'll see after my trip (cross country California to RI back).
Joed 
9/11/2019
The carrier is holding up just fine.
Works as advertised
This is a good product, however, I ran into two issues. #1 the top bolt for the tire mount was too far from the top corner of the of the bracket. I have a 4 bolt tire for my camper and the edge of the rim prevented me from mounting the tire to the carrier. ( I ended up bolting a different tire carrier to this one to make it work) #2 the bolt holes holding the carrier to the bumper have no play or adjustment. My bumper is welded along the entire back side to a metal beam. The beam has two cutouts where the old tire carrier was attached with U bolts. The cutouts did not line up precisely with the new carrier bolt holes, and the included U bolts were not long enough to span the depth of the 4.5" bumper plus beam. I was able to put in the bolts at a slight angle using the original cutouts, but this was not ideal.
Sierra K.
7/15/2021
Thank you for your review. The issues why this did not fit right for you are in the description. This fits most 5, 6 and 8 lug wheels and fits 4 inch square and 4 and a quarter inch square bumpers.
etrailer.com had the best price on this spare tire holder than any other website. It was easy to order and shipping was fast!
Amy M.
12/21/2017
The products are just as good as when I got them! Appreciate the follow up.
Great product. Need the torque recommendation though. It wasn't mentioned in the video
Easy install, hoping it will stand the rigors of the road.
Overall decent product, easy install and straight forward assembly. I decided to weld mine straight to a rear bumper, then when it folds flat I have a place to set up a table on the back side of the carrier, then there's the tailgate for more table, pretty cool. I knocked off a couple stars because a.) There's only one bracer plate for the back of the rimed tire and the "lug" nuts are regular plain jane nuts which means neither is a special keyed one so anyone can steal your tire and b.) the hitch pin to drop the carrier down is particularly small so I made a longer one out of a half inch, six inch long bolt. Fix those two things and it's 5 star. Thank you.
No problem with wheel carrier; I need to find suitable location on trailer that will not interfere with "truck to goose neck trailer" rotation, make tire accessible when needed and not interfere with machine when loading flatbed trailer from side.
Works great..glad I bought it.
Traveled 14000. Miles year and no problems.
Regina
6/9/2024
No problem here! Worked great
Do you have a question about this Spare Tire Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Stephen
7/12/2020
Still in great shape, holding up well. Doing its job. Would definitely buy again.